Dimm Configurations; L2 Cache; Graphics - Sony PCV-LX810 - Vaio Slimtop Computer System Reference Manual

90
VAIO Slimtop™ System Reference Manual

DIMM Configurations

*
DIMM1
0, 16, 32, 64, 128, 256
* The PCV-LX810/PCV-LX910 is shipped with 128 MB of total memory. SDRAM is expandable to 512 MB.
Computer SDRAM is unbuffered DIMM, specification Rev. 1.0 or later. PCV-LX810/PCV-LX910 supports
SDRAM memory. PCV-LX810/PCV-LX910 does not support EDO memory or buffered DIMM memory.
Memory can be installed in either socket. Memory size can vary between sockets. DIMMs can be single- or
double-sided. DIMMs must be 3.3 V unbuffered 4-clock, 64-bit or 72-bit, 133 MHz SDRAM module. Use
only 133 MHz memory. Do not mix 100 MHz memory with 133 MHz memory.

L2 Cache

Installed
Controller

Graphics

*
Controller
Video memory
Resolution (displayed resolution depends on the graphics display you use)
True color (32 bits)
High color (16 bits)
256 colors (8 bits)
* Supports DDC-1 and DDC-2b standards for Plug and Play displays.
DIMM2
0, 16, 32, 64, 128, 256
256 KB secondary write-back cache (in processor), direct-
mapped organization, on-chip cache
SiS630 host bridge controller
SiS630 graphics hardware acceleration
16 MB (uses system memory)
Up to 1600 x 1280 at 85 Hz non-interlaced
Up to 2048 x 1536 at 70 Hz non-interlaced
Up to 2048 x 1536 at 70 Hz non-interlaced
*