Setting Up The Port Replicator - Toshiba PA3838U-1PRP User Manual

Setting up the port replicator

To set up the port replicator, follow the steps below:
1 Turn off your computer.
2 Disconnect all cables/cords from your computer.
3 Connect your external devices to the appropriate ports on the
port replicator.
4 Connect the included AC adaptor to the port replicator.
The supplied power cord conforms to safety rules and regulations in
the region where the product was purchased. Do not use the AC
adaptor that was included with your computer. Always use the
Toshiba AC adaptor that was provided with this product or use
Toshiba recommended alternate adaptors to avoid any risk of fire
and/or other damage to the computer and/or port replicator. Use of
an incompatible AC adaptor could cause fire and/or damage to the
computer and/or port replicator, possibly resulting in serious injury.
TOSHIBA assumes no liability for any damage caused by use of an
incompatible adaptor.
When you connect the AC adaptor to the port replicator, always
follow the steps in the exact order as described below. Connecting
the power cable to a live electrical outlet should be the last step,
otherwise the adaptor DC output plug could hold an electrical charge
and cause an electrical shock or minor bodily injury when touched.
As a general safety precaution, avoid touching any metal parts.
(Sample Illustration) Connecting the power cord to the AC adaptor
a
b
Connect the provided power cord to the AC adaptor.
Connect the AC adaptor to the DC-IN connector that came
with your Hi-Speed Port Replicator.
Setting up the port replicator
13