Setting Up Your Printer; Install The Toner Cartridges - Brother 2700CN - HL Color Laser Printer Quick Setup Manual

Step 1
S
1

Install the Toner Cartridges

Do NOT connect the interface cable.
You will be prompted to connect the
interface cable during the driver
installation.
Do NOT touch the green surface of
the OPC belt or expose it to direct
sunlight or room light for any length
of time.
1
Remove the protective parts.
2
Open the front cover.
Front cover

Setting Up Your Printer

3
Remove the protective part.
4
Take out all the toner cartridges from the
printer.
5
Rock the toner cartridge 3 to 4 times.
6
Pull off the tape labeled REMOVE, and then
remove the orange protective cover.
REMOVE tape
Go to the next page
Protective cover
7