Download Print this page
Epson EPL-8000 Product Support Bulletin
Epson EPL-8000 Product Support Bulletin

Epson EPL-8000 Product Support Bulletin

Product support bulletin(s)
Hide thumbs Also See for EPL-8000:

Advertisement

EPSON AMERICA, INC.
Product Support Bulletin
Subject: How To Connect Epson PostScript Printers Into An AppleTalk Network
Date: 10/9/92
Page(s): 1 of 1
This bulletin provides information on how to interface Epson laser printers with an
Epson PostScript' Card to an Apple Macintosh
4
BridgePort
by Extended Systems.
Connecting a printer to an Apple Macintosh can be difficult if the printer does not
have an AppleTalk interface. The Epson Action Laser II and EPL-8000 laser
printers with the Epson PostScript Card installed do not have built-in AppleTalk
interfaces and as such can be difficult to connect to an AppleTalk network.
Extended Systems has a solution to this problem. It is the Bridgeport 2679B. This
printer sharing device allows you to connect a PostScript printer to an AppleTalk
network and two DOS-based PCs. The Bridgeport has an AppleTalk port that
allows connection to either a stand-alone Macintosh or to an AppleTalk network via
Apple LocalTalk. This device also has a serial and a parallel port for connecting
two DOS-based PCs. The Bridgeport will monitor each of the input ports and route
data that it receives to the printer.
The Bridgeport 2697B was tested from an AppleTalk network to an Action Laser II,
an EPL-8000 with the Epson PostScript Card, and to an Epson EPL-7500. All three
installations worked flawlessly and the printed output was exactly as expected. This
device requires that the Apple LaserWriter? driver Version 5.2 or above be installed
on the network.
The manufacturer suggested retail price of the Extended Systems' Bridgeport is
5
$495.00
. See below for Extended Systems' address and telephone numbers.
PostScript is a registered trademark of Adobe Systems Incorporated.
Macintosh is a trademark of Apple Computer, Inc.
AppleTalk, LocalTalk, and LaserWriter are registered trademarks of Apple Computer, Inc.
Bridgeport is a trademark of Extended Systems Incorporated.
Price is subject to change without notice.
2
Extended Systems
P.O. Box 4937
Boise, Idaho 83711
(800) 235-7576 (U.S.)
(406) 587-7575 (Outside U.S.)
PSB No: P-0092
Originator: SDS
using Apple LocalTalk
EPSON
3
and the

Advertisement

loading

Summary of Contents for Epson EPL-8000

  • Page 1 The Bridgeport 2697B was tested from an AppleTalk network to an Action Laser II, an EPL-8000 with the Epson PostScript Card, and to an Epson EPL-7500. All three installations worked flawlessly and the printed output was exactly as expected. This device requires that the Apple LaserWriter? driver Version 5.2 or above be installed...
  • Page 2 Q. What is the rated print speed and resolution for the EPL-8000? A. The EPL-8000 print speed is up to ten (10) pages per minute (PPM) when using letter-size paper, and the resolution is 300 x 300 dots-per-inch (dpi).
  • Page 3 How much memory comes standard with the EPL-8000? The EPL-8000 comes standard with 1MB of memory. Is it possible to add chips to the main board of the EPL-8000 to expand the memory? Yes, the 256K X 4 memory chips may be added to the main board to expand the memory of the EPL-8000 up to 2MB.
  • Page 4 PSB No: P-0085 Page: 3 of 6 12. Q. What interface ports are built-in the EPL-8000? A. The EPL-8000 has two (2) of the most commonly used interface ports built-in: Centronics Parallel RS-232C or RS-422 Serial The EPL-8000 also has an additional slot for the EPSON “B” Type interfaces.
  • Page 5 2000 additional pages. Otherwise, the two Imaging Cartridges are functionally the same. 17. Q. Why does the EPL-8000 have both card slots (A) and (B), and a cartridge slot (C)? The card slots are for Epson identity cards. In the future, the Adobe PostScript identity card will work in this slot.
  • Page 6 After the page prints, press the left arrow button (SelecType) twice to return the unit to an on-line condition. Q. If a “FEED JAM” message is displayed when the EPL-8000 is first powered up, how can the problem be corrected? A.
  • Page 7 Q. If the print density seems too dark or too light, is there a way to control it? A. The print density is controllable by turning the small green print density control knob, which is located inside the EPL-8000 on the right side. Q. What printer driver selection should I choose in my software programs when using the EPL-8000 in the HP mode? A.