Table of Contents
Advertisement
CAUTION: To avoid damaging your HP iPAQ or the cradle, check
to be sure the device and cradle connectors are properly aligned
before pushing the HP iPAQ into the HP Desktop Cradle.
To avoid damaging your HP iPAQ or the autosync cable, be sure the
HP iPAQ and cable connectors are properly aligned before pushing
the cable into the universal sync connector.
4.
Perform one of the following:
●
Connect the USB cable to your computer. Synchronization
begins automatically.
●
Connect the other end of the autosync cable to your computer.
Synchronization begins automatically.
5.
Click Next on the Synchronization Setup Wizard screen.
6.
Do one of the following:
●
Uncheck the box if you do not want to synchronize directly with
an Exchange server, then click Next.
●
Click Next if you want to synchronize directly with a server.
NOTE: If you must log onto a server such as your company's Virtual
Private Network, you may receive a message from ActiveSync telling
you it is unable to synchronize. You must first log onto the server for
ActiveSync to synchronize.
7.
When the Synchronization Options screen displays, check the
items you want to synchronize between your HP iPAQ and your
computer then click Next.
The Synchronization Setup Wizard starts synchronizing the items
you checked.
8.
Once your items have been synchronized, click Finish.
If ActiveSync does not begin synchronizing, start it manually. On your
personal computer, open ActiveSync by clicking from the Start >
Programs > Microsoft ActiveSync > Sync.
Occasionally when attempting to synchronize to a computer, you might
receive an "Unable to Detect Device" error message. This usually means
your HP iPAQ is not properly seated in the desktop cradle, or the autosync
cable is not properly connected to the computer.
14
Hide quick links:
Advertisement
Table of Contents
