Hitachi CP-AW250N User Manual page 13

Connecting with your devices (continued)
To use network functions of the projector, connect the LAN port with the
computer's LAN port, or with an access point that is connected to the computer
with wireless LAN, using a LAN cable. To use NETWORK BRIDGE function,
also connect the CONTROL port and an RS-232C port of the external device to
communicate as a network terminal. See the User's Manual - Network Guide for
details of the network functions.
USB
TYPE A
DC5V
0.5A
CAUTION
to obtain the consent of the administrator of the network (64).
►Do not connect the LAN port to any network that might have the excessive voltage.
NOTE
• If an oversized USB storage device blocks the LAN port, use a USB
extension cable to connect the USB storage device.
Access point
HDMI
USB TYPE B
MONITOR OUT
CONTROL
►Before connecting the projector to a network system be sure
Computer
LAN
COMPUTER IN2 COMPUTER IN1
AUDIO OUT
MIC AUDIO IN1 AUDIO IN3
AUDIO IN2
Setting up
RS-232C
S-VIDEO
VIDEO
13