Epson P-2000 - Multimedia Storage Viewer Product Support Bulletin page 12

To download and install the new firmware file, you will need the following:
Windows-based PC or Macintosh computer with Internet access
Operating Systems: Windows 98/ME/2000/XP Home/Pro
Operating Systems: Macintosh 9.1-9.2.2, OS 10.2 to 10.4.x
Memory Card Reader/Writer
32MB or higher formatted Compact Flash or sD memory card (there must be no data on the
card)
P-2000 battery installed (fully-charged battery recommended)
AC Adapter – the firmware update should be performed with the unit powered by its AC
power adapter.
Firmware Update Procedure:
Download the file epson11467.exe for Windows or epson11468.sea.hqx for Macintosh from the
Epson website.
Important Note:
If the firmware version of your P-2000 is 01.01, it is strongly recommended that
you first upgrade to version 02.02 before upgrading to 02.04. See bulletin PSB.2005.03.001R4 for
more details.
To verify the firmware version, power on the unit, select Settings in the
Home Menu and press the OK button. The firmware version is located in the
lower right-hand corner of the screen, as shown below.
Page 2 of 5
PSB.2005.06.002R2