Honeywell HNVE1 Reference Manual page 32

Installing the Honeywell IP Utility and Web-Client Software
32
3. In the Password field, type the case-sensitive password.
• The default Administrator password is 1234.
Only one Administrator can be logged on at a time.
• The default Guest password is guest.
Note During the installation set up, you must log on as an Administrator to have
access to all the features.
4. Click .
The Honeywell IP Utility program searches for devices on the network and opens to
the Honeywell IP Utility user interface.
5. Automatically discover or manually refresh the list of devices on the network.
Use the manual refresh if a new device was added after you logged onto the system.
• You do not need to do anything to discover devices. When you log on to the IP
Utility, the devices on the network — including the devices on other subnets —
are automatically discovered and listed in the Discovery pane. After the initial
discovery, the network automatically continues to discover devices that are newly
added or removed from the network.
• To manually refresh the device list, click Refresh
Discovery pane.
6. Enable or disable the HTTP Server checkbox for additional security. Only an
Administrator login can disable (uncheck the box), resulting in the user being unable
to access the Web-Client, although video recording is unaffected.
, located near the top of the