Toshiba D-KR2SU Owner's Manual page 49

DVD
TOP MENU MENU RETURN
ANGLE SUBTITLE AUDIO CHANNEL
TIMESLIP
INSTANT REPLAY INSTANT SKIP
EASY
NAVI
REC MENU EDIT MENU
LIBRARY CONTENT MENU
ENTER
PAUSE STOP PLAY
REC REC QUICK MENU
VCR Plus+ EXTEND REC MODE TV CODE
T.SEARCH
1 2 3
CLEAR
4 5 6
DELETE
7 8 9
SETUP ENTER
+
0 10
Open the lid.
CHANNEL
Notes
• If the recorder's mode and the remote control's mode are different, the recorder's mode (DR 1, DR 2 or DR 3) appears in the
display of the front panel.
• When the batteries of the remote control are replaced or when the time indicator of the front panel flashes, check the remote
control modes of both the recorder and the remote control, and re-program if necessary.
Disabling the remote control for a temporary period
You can temporarily disable the reception of the remote control signals at the recorder, when the selection of DR 1,
DR 2 and DR 3 is not sufficient while you are using several Toshiba DVD video recorders.
Press the CHANNEL buttons on the recorder at the same time for three seconds or more.
The recorder display shows "DR - OFF", indicating that the remote control is disabled.
To enable the remote control, perform the same step again. (The display shows "DR-1 , DR-2 or DR-3" depending
on your setting.)
Note
• This function is not available in Standby mode.
• You cannot use this feature when the power is turned off, if you have turned "On" the "Eco. mode" on the menu.
Setting up the remote control
5
While pressing SETUP, press 2.
The remote control mode is set to '"DR 2".
SETUP
2
Select the same mode that you have set to the recorder.
When using with DR 1
mode
When using with DR 2
mode
When using with DR 3
mode
Mode setting
Recorder Remote control
DR 1
SETUP
DR 2
+
DR 3
DR 1
SETUP
DR 2
+
DR 3
DR 1
SETUP
DR 2
+
DR 3
1
2
3
49