LG 32LC2DC Owner's Manual page 66

Reference
The audio function does not work.
Picture OK &
No sound
No output from one
of the speakers
Unusual sound
from inside the
product
• Press the VOL or VOLUME button.
• Sound muted? Press MUTE button.
• Try another channel. The problem may be with the broadcast.
• Are the audio cables installed properly?
• Adjust Balance in menu option.
• A change in ambient humidity or temperature may result in an unusual
noise when the product is turned on or off and does not indicate a fault with
the product.
J
(Only PC mode applied)
The signal is out of
range.
Vertical bar or
stripe on back-
ground &
Horizontal Noise &
Incorrect position
Screen color is
unstable or single
color
• Adjust resolution, horizontal frequency, or vertical frequency.
• Check it whether the signal cable is connected or loose.
• Check the input source.
• Work the Auto configure or adjust clock, phase, or H/V position. (Option)
• Check the signal cable.
• Reinstall the PC video card.
J
- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
1. Here's a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it's almost dry, and then use it to wipe
the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please do not use a wet cloth.
66
If you expect to leave your TV dormant for a long time (such as a vacation), it's a good idea to
unplug the power cord to protect against possible damage from lightning or power surges.