Sony PEG-T415 - Personal Entertainment Organizer Operating Instructions Manual page 7

Preparing the CLIÉ Remote Commander for your use
3
Tap the arrow V next to the following items and select the
appropriate settings for your device(s).
• Category: Select the device you want to remote-control. Select from
TV, VCR, DVD, AV-AMP (amplifier).
• Maker: Select the manufacturing company of the remote-controlled
device from the drop-down list.
• Mode: Select the remote control mode from the drop-down list
(different models may require a different mode in order to operate).
• Button: Select which quick-start button you wish to assign the device
to. Choose the letter from the drop-down list, or select none.
4
Point the IR port of the CLIÉ handheld toward the device you
want to remote-control and tap Test (power on/off).
If the device does not respond to the CLIÉ Remote Commander, select a
different mode type in step 3.
5
In the Name box, enter a name for this remote control setting
(e.g. VCR in the den).
6
Tap OK.
The remote control setting is assigned to the selected quick-start button,
and the control screen for the assigned device appears.
Example of the VCR remotes
7
To assign more devices to the other quick-start buttons, tap
Select on the control screen and repeat steps 2 to 5.
Note
Even if the manufacturer of the device is listed on the supported manufacturer list on
page 14, some devices cannot be remote-controlled depending on its model or the year
of its production.
7