Site Considerations; General Considerations; Desktop Or Shelf Installation - D-Link DSN-5210-10 - xStack Storage Area Network Array Hard Drive Hardware Reference Manual

Xstack storage iscsi san array
Hide thumbs Also See for DSN-5210-10 - xStack Storage Area Network Array Hard Drive:
Table of Contents

Advertisement

3.1

Site Considerations

The site where you install the DSN-5000 series primary array can affect its performance.
Therefore, choose a site that conforms to the requirements in the following sections.
3.1.1

General Considerations

Observe the following considerations when selecting a location to install the DSN-5000 series
primary array.
The location should be fairly cool and dry for the acceptable temperature and humidity

ranges.
The location should be free of strong electromagnetic field generators (such as motors),

vibration, dust, and direct exposure to sunlight.
The location must provide sufficient airflow to the front and back of the DSN-5000 series

primary array for correct cooling. Ventilation must be sufficient to exhaust heat from
the rear of the equipment.
The location should offer a power outlet within six feet (1.82 meters) of the DSN-5000

series primary array.
The location should allow for at least six inches (152.3 mm) of space at the front and

back of the DSN-5000 series primary array for ventilation.
Do not place the DSN-5000 series primary array next to, on top off, or below any device

that generates a significant amount of heat or will block the fee flow of air through the
DSN-5000 series primary array ventilation slots.
3.1.2

Desktop or Shelf Installation

The DSN-5000 series primary array can be mounted on a desktop or shelf. Observe the
following considerations for desktop or shelf installations.
Select a sturdy, level surface that can support the DSN-5000 series primary array. A fully

populated unit weighs approximately 85 lbs. (38.6 kg.).
Allow enough ventilation space between the DSN-5000 series primary array and any

other objects in the vicinity.
Be sure not to block the air vents on the front and back of the DSN-5000 series primary

array enclosure. Install the cables and power cords according to the procedures in the
following sections.
18
Chapter 3
Installing the DSN-5000 Series Primary Array

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsn-5410-10Dsn-5000-10Dsn-5110-10

Table of Contents