Processor - HP 325 - Notebook PC Maintenance And Service Manual

Processor

NOTE: The processor spare part kit includes replacement thermal material.
Description
AMD Athlon™ II Dual-Core P320 2.1-GHz, 2MB L2
AMD Sempron™ Single-Core V120 2-GHz, 2MB L2
AMD Turion™ II Dual-Core, P520 2.3-GHz, 2MB L2
AMD Phenom II Champlain P820 25W
Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the fan (see
7. Remove the heat sink (see
Remove the processor:
1. Position the computer right-side up with the front toward you.
2. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn
counterclockwise until you hear a click.
62 Chapter 4 Removal and replacement procedures
Battery on page 48).
Service door on page
Fan on page 59).
Heat sink on page
49).
60).
Spare part number
594165–001
594171–001
594173–001
594167-001