Connecting The External Media Bay; Swapping Devices While The Computer Is Turned Off - Dell Inspiron 2100 Solution Manual

Connecting the External Media Bay

To use the external media bay, connect the media bay cable to the external
media bay and to the external media bay connector on the back of the
computer.
external media bay
connector

Swapping Devices While the Computer Is Turned Off

Save and close any open files, exit any open programs, and shut down
1
the computer (see page 14).
Detach the media bay cable from the external media bay.
2
Turn the external media bay over.
3
Slide and hold the latch release, and pull the device out of the bay.
4
NOTICE: To prevent damage, place devices in a travel case when they are not
inserted in the external media bay. Store devices in a dry, safe place, and avoid
placing heavy objects on top of them.
Insert the new device into the bay, and push it until you hear a click.
5
Attach the media bay cable to the external media bay.
6
Turn on the computer.
7
media bay cable
external media bay
15
Sett ing Up