Dell Inspiron 4100 Solution Manual page 82

82
Re pl a c i n g Par t s
Remove all installed batteries, and disconnect the AC adapter cable
4
and any external devices from the computer. Wait 5 seconds before
proceeding.
Ground yourself by touching a metal connector on the back of the
5
computer.
NOTICE: While you work, periodically touch unpainted metal on the
computer to dissipate static electricity that might harm internal components.
Turn the computer over, remove the screw(s) from the memory
6
module cover, and lift up the cover.
screw (2)
NOTICE: To prevent damage to the memory module connector, do not use
tools to spread the inner metal tabs that secure the memory module.
If you are replacing a memory module, remove the existing module.
7
NOTICE:
Handle memory modules by their edges, and do not touch the
components on a module.
Use your fingertips to carefully spread apart the securing clips on
a
each end of the memory module connector.
The module should pop up.
Remove the module from the connector.
b
memory module cover