Epson PowerLite Home Cinema 3020 Quick Setup

PowerLite Home Cinema 3020
®

Quick Setup

Before using the projector, make sure you read the safety instructions in the
online User's Guide.

Choose a location

Keep the projector level and place it at a height so its lens is even with the top
or the bottom of the screen and is centered horizontally. If this isn't possible,
use the horizontal keystone slider and keystone correction buttons to reposition
the image (see "Adjust the image").
In order to view 3D images correctly, 3D glasses must be worn within 32 feet
(10 m) of the projector. Use the image below to determine the viewing distance
for 3D projection (the shading represents the 3D viewing area):
See the online User's Guide for more information on where to place your
projector.
Connect the projector
Choose from the following connections. For additional connection types, see
the online User's Guide.
Video Device
Connect up to 5 video devices and use the Source buttons on the projector or
remote control to switch between them.
*412371600*
*412371600*
HDMI cable
RCA video cable
Audio cable
Component video cable
Audio cable
Turn on your equipment
1
Turn on your video source or computer.
2
Plug in the projector. The
3
Remove the lens cap.
4
Press the power button on the projector or the On button on the
remote control. The power light flashes blue, and then stays on.
Note: To shut down the projector, press the
projector twice or the Standby button on the remote control, then
unplug it. You don't have to wait for the projector to cool down.
5
The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select Extended
and press Enter. Select Language and press Enter. Select your language
and press Enter. Press the Menu button to exit the menu system.
Adjust the image
1
If you don't see an image, press the Source buttons on the projector or
select the image source on the remote control.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the front of this sheet.
2
To raise the image, adjust the front feet as shown below.
3
Turn the zoom ring to reduce or enlarge the image.
power button on the projector turns blue.
power button on the