Setting The Clock; Using Your Unit As An Alarm Clock; Snooze; Dimmer - LG ND1520 Owner's Manual

,
Note
y If this unit displays an error message, follow
the message. An error message "ERR".
- Your iPod/iPhone is not connected firmly.
- This unit recognizes your iPod/iPhone as
an unknown device.
- Your iPod/iPhone is exceptionally low in
power.
/ The battery needs to be charged.
/ If you charge the battery while iPod/
iPhone is extremely low in power, it
may take longer to be charged.
y Depending on your iPod/ iPhone 's software
version, it may not be possible to control
your iPod/iPhone from this unit. We
recommend installing the latest software
version.
y If you use an application, make a call, or
send and receive SMS text message, etc. on
iPod touch or iPhone, disconnect it from
iPod/iPhone dock of this unit and then use
it.
y If you have a problem with your iPod/
iPhone, please visit www.apple.com/
support.
y In standby mode, you can charge your iPod/
iPhone by connecting it to iPod/iPhone
Dock.
y You may need additional operation for iPod
touch or iPhone, for example "unlock" by
draging the slider.
ND1520-FI.BGBRLLK_6285-ENG.indd 11

Setting the Clock

Connect the iPod/iPhone firmly. Then the clock
setting in the display window will synchronize with
your iPod/iPhone.
After the unit synchronized with your iPod/iPhone
for clock setting, there will be a time difference
between the iPod/iPhone and the unit . In standby
mode, the clock won't synchronized with your
iPod/iPhone.
Using your unit as an alarm
clock
1. Turn the unit on or off.
2. Press and hold ALARM to set the alarm
function.
3. The alarm sound sources blinks. (FM(TUNER)/
IPOD). While each of sound sources blinks,
select the one you want by pressing D/Pr.
If you select FM(TUNER) mode, you can select
the station you set before by pressing
4. "ON (TIME)" setting is displayed.
The hour setting blinks. Press
the hour and then press D/Pr
5. The minute setting blinks. Press
select the minute and then press
6. The volume settings blinks. Press
change the volume and then press
save.
7. You can check the setting status.
8. If you want to reset the alarm, repeat steps 2-6.

SNOOZE

While alarm activates, snooze function wakes you
up every 10 minutes if you press SNOOZE/SLEEP. If
the time you set is up, the unit turns on
automatically and the alarm function works. If you
press SNOOZE/SLEEP, the alarm function stops
working. "ZZZ" and " " will blink. The alarm sounds
again in 10 minutes.

Dimmer

Press SNOOZE/SLEEP once. The display window
will be darkened by half. To cancel it, press
SNOOZE/SLEEP repeatedly until the display
window get bright.
Operating 11
2
/ .
/ to select
to save.
/ to
D/Pr to save.
/ to
D/Pr to
2012-04-19 6:17:32