Table of Contents
Advertisement
Sorting and Searching
Basically, directories are sorted in the following order: special characters, numbers, characters.
•
All: All entries are displayed.
•
Alphabet: If the first letter of a name in the entries is included in the selected alphabet button, the entries are displayed.
•
Group: If entries are included in the selected group button, the entries are displayed.
•
Search: If the letter or special character in the name is included in the written character on the search field, the entry is displayed.
Placing a Call when the Device is Registered in Gatekeeper Server
Yon can place a call by entering the registered far site name in gatekeeper server.
1. You must confirm registered far site name in gatekeeper server.
2. Select the text input field and press OK.
3. Enter a registered far site name. Use 1/a/A to change the method of text entry for text input field.
4. After entering a value, press OK.
5. Press OK again to place a call. The call status dialog box is displayed.
NOTE
•
If you want to cancel the call, press OK while dialing.
•
If you do not answer the call in 2 minutes, the system will disconnect the call automatically.
Making a Call when the Device is Registered in SIP Server
1. You must confirm registered far site name in SIP server.
2. Select the Text input field and press OK.
3. Enter an registered far site name. Use 1/a/A to change the method of text entry for text input field.
4. After entering a value, press OK.
5. Press OK again to place a call. The call status dialog box is displayed.
NOTE
•
If you want to cancel the call, press OK while dialing.
•
If you do not answer the call in 2 minutes, the system will disconnect the call automatically.
Using Far End Camera Control
If the far site camera has the PTZ function, you can control the far site camera during the call.
1. Connect to the far site.
2. Press FAR on the remote control.
3. You can control far site camera by pressing CAM ZOOM +, CAM ZOOM - and Arrow buttons.
Using Far End Camera Preset
If the far site camera has the PTZ function or another video source, you can use the preset function.
1. Connect to the far site.
2. Press PRESET on the remote control.
3. Press
on remote control and select a video source.
ll
4. Move the cursor to the number you want to save.
5. Press
on the remote control.
l
6. Control the far site camera to the location as you want.
7. Press
. Then you will be able to save the location at that number.
l
is selected automatically.
is selected automatically.
Operation
47
4
Advertisement
Table of Contents
