Settings The Destination - Sharp MX-M202D Operation Manual

SETTINGS THE DESTINATION

Specify a sending source of received data and forwarding destination e-mail addresses to configure a forwarding
table.
Up to 10 forwarding tables can be configured.
For each forwarding table, set the following items:
• Forward Condition (enabling/disabling forwarding, and the conditions to determine forwarding)
• Sender number (fax number)
• Forwarding destinations (e-mail addresses)
• The names of the destination number (Forward destination 1 to 10) cannot be changed.
Note
• Only the e-mail address can be specified for a forwarding destination. FTP, Desktop, and fax number cannot be
specified.
Viewing the destination list
1
In the menu frame, click [Inbound
Routing Settings].
Item
Inbound Routing
Number
Forward Condition
[Delete] button
[Clear Checked] button
Settings the destination
1
In the menu frame, click [Inbound
Routing Settings].
2
Click [Destination].
The destination list appears.
3
Click the destination number to be
set.
The "Forwarding Destination" screen appears.
4
Select [Enable] in "Forward
Condition".
Displays whether Inbound Routing function is enabled.
Displays the forwarding destination number (Forward Destination 1 to 10).
Each of setup menu is displayed by clicking each number.
Displays the forward condition of the destination (enabling/disabling and determining
the destination setting).
To delete the forwarding condition stored in a destination number, select the "Number"
checkbox of the destination number and click the [Delete] button.
Clicking this clears all "Number" checkboxes.
ADVANCED TRANSMISSION METHODS
2
Click [Destination].
The destination list appears.
Description
5
In "Forward Condition", select the
determining condition for forwarding.
Select [Forward (All)] or [Forward (Sender)].
6
If you wish to forward received data
from a specific sender, enter the
sender's fax number in "Sender
Number".
Enter the fax number using up to 20 digits.
To enter the fax number from the fax addresses
stored in the machine, click the [Select from
Address Book] button. The "Fax Destination"
screen appears, and you can select the sender's
number from the fax address list.
3
47