Using external equipment
Displaying an external
equipment image
To view external source images, select the input
source from INPUT on the remote control unit or on
the TV.
Press INPUT.
1
• A list of selectable sources appears.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
Press INPUT again to select the input source.
2
• An image from the selected source automatically
displays.
• Each time INPUT is pressed, the input source
toggles.
• You can also select the input source by pressing
a / b .
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
NOTE
• See pages 33 and 34 for external equipment connection.
Input Select
PPV TV
NORMAL TV
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 2 (LC-42HT3U
only), you may need to change the input signal type
setting on the "Input Select" menu.
Press MENU to display the MENU screen, and
1
then press c / d to select "Option".
Press a / b to select "Input Select", and then
2
press ENTER.
Press a / b to select the signal type you want
3
to set, and then press ENTER.
• If the selected signal type is incorrect, images are
Press MENU to exit.
4
• The setting is stored and can be selected on the
NOTE
• Refer to your external equipment operation manual for the
signal type.
• If you set INPUT 1 or 2 (LC-42HT3U only) to Auto, the TV
will automatically select the input signal.
• Setting INPUT 1 or 2 (LC-42HT3U only) signal selection to
"Auto" when other equipment is connected will result in the
following connection priority.
INPUT 1 or 2 (LC-42HT3U only):
1 COMPONENT VIDEO
2 VIDEO
not displayed or displayed without any color.
Auto
COMPONENT
VIDEO
"INPUT SOURCE" menu.
NORMAL TV
51