Epson LQ 1050 - B/W Dot-matrix Printer Product Support Bulletin

EPSON AMERICA, INC.
Product Support Bulletin
Subject: 24 Pin Printer Error and Beep Codes
Date: 4/3/91
Page(s): 1 of 4
Epson printers issue beep tones when certain error conditions exist. Those beeps
can assist you in locating and repairing customer's printers. The following error
codes are listed by product name.
NOTE: Most of the beeps issued by the printers are of .1 second duration with a .1
second pause between beeps. Where the beeps or the pauses are longer,
it has been noted in the text. The description "3 Beeps x 2" means two sets
of three beeps.
LQ-200/AP-3000
1 beep:
1 beep:
3 beeps:
5 beeps:
On-Line light is flashing:
LQ-500, LQ-510, LQ-1010, LQ-850, LQ-950, LQ-1050,
L1000, AP-4000, AP-4500
1 beep:
1 beep:
3 beeps:
5 beeps:
PSB No: P-0076
Originator JV
BEL code
A Control Panel setting is accepted.
Paper End detected
Abnormal carriage movement
Printhead is over heated. Carriage will stop until
the printhead cools down.
BEL code (.5 sec beep)
A Control Panel setting is accepted
Paper End detected
Abnormal carriage movement
EPSON