HP 5600 - Compaq TFT RKM User Manual page 19

Installation
3. Attach the brace assembly to each mounting rail with the cable access hole facing
the right side of the rack.
a. Flex the rail out slightly to allow the brace to be inserted. Align the screw
holes on the brace with the screw holes on the rails (1).
b. Insert one 6-32 screw (2) on each side.
c. Tighten the screws (3).
3
Figure 2-3: Attaching the brace to the mounting bracket
NOTE: Make sure the cable access hole is positioned on the right, to allow appropriate
routing of cables.
2-4
2
HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide
1