Setting Up Your Monitor
Where to Place the Monitor
Place your monitor on a flat sturdy surface.
Ensure the operating site is free from excessive heat, moisture, dust and
sources of electromagnetic fields. Sources of electromagnetic fields include
transformers, motors, and other monitors.
Avoid exposing the monitor to direct sunlight.
Installing the Monitor
This monitor is equipped with an auto-sensing power supply for voltage
ranges 100 ~ 240V AC, 50 ~ 60 Hz. Only use with the supplied adapter.
1.
Make sure that the
system power is turned
off.
2.
Plug the signal cable to
the signal connector at
the rear of PC.
3.
Plug the adapter output
cable to the jack at the
rear of LCD monitor
and the power cord to
the adapter.
4.
Connect the power cord
to the power source.
5.
Turn on the computer
and the monitor.
HP 15" LCD Color Monitor User's Guide
Setting Up Your Monitor
English
5