Table of Contents
Advertisement
Video Recorder 400 Series
5.4
Viewing pictures
The unit has two monitor outputs, A and B. The way in which these monitors display pictures
depends on how the system is configured.
5.4.1
Monitor A
Monitor A is the main monitor. It shows full-screen or quad multiscreen live, or playback
camera pictures. Status messages, alarms, motion, and video loss warnings are also displayed
on this monitor. When the menu system is activated, it is displayed on this monitor. Monitor A
is the default monitor for keyboard and mouse commands.
5.4.2
Monitor B
Monitor B displays full-screen or a sequence of live pictures. When an alarm or motion input is
detected, the camera picture with the Alarm/Motion indicator can be displayed on monitor B.
When multiple alarms or motion occur, camera pictures are sequenced on monitor B.
Changing the display on Monitor B
To control the display on monitor B:
1.
2.
3.
5.4.3
Viewing
The drawing shows all possible views for monitor A.
Figure 5.4 DVR 400 Series supports single and quad screen viewing
Multiscreen
To view quad displays on monitor A:
–
Full-screen
To view a full-screen shot of a camera:
–
Sequence
To view a sequence of live camera pictures of several cameras:
1.
Bosch Security Systems
Bring up the System Control Bar.
Click the Monitor B
From the pop up menu, select the display for Monitor B
–
Select 1-4 for the corresponding Camera
–
Select the sequence
Single
1
Press the quad
key.
–
A quad display of camera pictures appears on the active monitor.
Press a camera key.
–
A full-screen shot of the analog camera that was selected appears.
Press the sequence
–
A sequence of camera pictures appears, each for a pre-programmed dwell time.
Installation and Operation manual
button.
key to sequence channels 1-4
Quad
1
2
4
3
key.
Operating instructions | en
F.01U.168.054 | v1.1 | 2010.06
31
Hide quick links:
Advertisement
Table of Contents
