Antenna Setup - Digital; Channel Memory Setting; Channel Strength - Sharp LC 42D43U - 42" LCD TV Operation Manual

Basic adjustment settings
Channel memory setting
vo OH
FREEZE MENU
0 @
m FAVORITECH m
®®@@
SL_:EP AUDIO AV_0D_ CC
Press MENU to display the MENU screen, and
then press _11/1_to select "Setup".
Press &/Y to select "CH Setup", and then
press ENTER.
• If you already set the Secret No., input the 4-digit
secret number here. See page 41 for setting a
secret number.
Press &/V to select "CH Memory", and then
press ENTER.
Press &/T to select ANALOG (Air), ANALOG
(Cable), DIGITAL (Air) or DIGITAL (Cable), and
then press ENTER.
When viewing ANALOG broadcasts:
Press 4/1_ to select the channel to skip,
and then press 'IV to move down.
Press _1/1_ to select "On", and then press
ENTER.
When viewing DIGITAL broadcasts:
Press &/Y to select the channel to skip,
and then press _11/1_ to select "On".
On: Skips channels.(Channelselection disabled using CH
A/V.)
• off: Does not skip channels.(Channelselectionenabled
using OH A/V.)
Press MENU to exit.
Make sure what kind of connection is made with your TV.
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the "Antenna Setup -
DIGITAL" screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
Press MENU todisp,ay the M ENU screen, and
..... : _ then press _/_ to select "Setup".
Press A/'V to select "Antenna Setup -
DIGITAL", and then press ENTER.
Press &/Y to select "Signal Strength".
- The signal strength of DIGITAL channel is
displayed. The signal information is based on the
current channel.
£ignalgtrength
Press MENU to exit.
Channel Strength
The channel signal strength can also be checked
separately.
Repeat steps 1 and 2 in Signal Strength in
Antenna Setup - DIGITAL,
Press A'"to se,ect "Channe, Strength", and
';111' then press ENTER.
Input the 2-digit channel number to check the
signal strength of the selected channel.
- Make sure the signal is strong enough for each
channel.
OhanneJStrength
Press MENU to exit.
Q- 24
This function is available for DIGITAL (Air) only.