Selecting A Channel - Epson Livingstation LS57P2 Supplement Manual

Selecting a Channel

Follow these steps to select a channel from the Electronic Program Guide (EPG):
Make sure you are tuned to a digital (High Definition) channel; your tuner does not support the EPG for
1
non-digital channels.
Note
If you see a message that the EPG is not supported, press the up or down arrow button on your tuner's remote control to switch to
a digital channel.
Press the button on the tuner's remote control twice. You see the Channel Guide.
2 EPG
Use the up and down arrow buttons on the tuner's remote control to scroll through the guide. Highlight the
3
Physical Channel that is on the same row as the Virtual Channel you want.
Press the button. The image for the first Virtual Channel in the row appears in the preview box in the
4 Enter
upper right corner. (In the screen above, the image from KCET-HD 28-01 is displayed.)
Press the button on the remote control twice. The screen displays the previewed image.
5 Exit
To select another Virtual Channel in the same row, press the up arrow button on the tuner's remote control
6
until you see the image for the channel you want. To move back to a previous channel in the row, press the
down arrow button.
Note
You can also use the numeric keypad on the tuner or television remote control to select a channel. For instructions on using the
tuner's remote control to select a channel, see "Selecting Digital Channels" in your tuner's User's Guide.
®
HDTV LCD Projection Television
CPD-18867R1
Printed in USA