Fspf-3 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
interface [chars] in VSAN [dec].
Error Message
[chars] for interface [chars] in VSAN [dec] , error = [chars].
Error Message
Error code = [hex].
Error Message
Error Message
opcode = [hex] before GSYNC.
Cisco MDS 9000 Family System Messages Reference
2-116
FSPF-3-HELLO_MISMATCH: Mismatch in [chars] in the Hello packet on
There is a mismatch in the entry in the hello packet received on the interface and VSAN
Explanation
shown in the error message. The packet will be dropped.
Recommended Action Check the configuration of the the hello or dead interval on the switches on
the two ends of the interface to see if there is a mismatch.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FSPF-3-INTF_TIMER_ERR: Error in processing interface timer event
Fabric Shortest Path First (FSPF) had an error processing a timer event for the named
Explanation
interface. The error is shown in the error message.
Provide the output of the debug fspf error command to your customer service
Recommended Action
representative.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FSPF-3-IPC_PROC_ERR: Error in processing IPC message : Opcode = [dec],
Fabric Shortest Path First (FSPF) had an error processing a message (opcode shown in
Explanation
the error message). The internal error code is shown in the error message.
An incorrect IPC message may have been received by FSPF. Provide the output
Recommended Action
of the debug fspf mts pkt and debug fspf error CLI command to your customer service
representative.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FSPF-3-LOCK_FAIL: FSPF failure in gaining lock.
There is a problem with locking a shared resource between Fabric Shortest Path First
Explanation
(FSPF) threads.
Provide the output of the debug fspf all CLI command to your customer
Recommended Action
service representative.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
FSPF-3-MTS_MSG_BEFORE_GSYNC: FSPF in standby received MTS message
Fabric Shortest Path First (FSPF) in standby received a messaging and transaction
Explanation
service (MTS) message before receiving the GSYNC message.
Provide the output of the debug fspf mts pkt command to your customer
Recommended Action
service representative.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01