Zone Set Duplication
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 30-32
You can edit this configuration before backing up the data to a remote server.
Step 4
Provide the following Remote Options information to back up data onto a remote server:
a.
b.
c.
d.
e.
Click Backup or click Cancel to close the dialog box without backing up.
Step 5
Restoring Zones
To restore the full zone configuration using Fabric Manager, follow these steps:
Step 1
Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Select a VSAN and click OK.
Step 2
You see the Edit Local Full Zone Database dialog box for the selected VSAN as shown in
Cisco MDS 9000 Family Fabric Manager Configuration Guide
30-32
Backup Zone Configuration Dialog Box
Using—Select the protocol.
Server IP Address—Enter the IP adress of the server.
UserName—Enter the name of the user.
Password—Enter the password for the user.
File Name(Root Path)—Enter the path and the filename.
Chapter 30
Configuring and Managing Zones
Figure
OL-17256-03, Cisco MDS NX-OS Release 4.x
30-33.