Page 1 HP 2533t Mobile Thin Client Administrator Reference Guide...
Page 2 © Copyright 2008 Hewlett-Packard Development Company, L.P. Windows is a U.S. registered trademark of Microsoft Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
Page 4 Safety warning notice...
Page 5: Table Of Contents
Table of contents 1 Notebook tour Identifying the hardware ........................1 Top components ........................1 Pointing devices ....................1 Lights ........................2 Buttons and switches ..................3 Keys ........................4 Display ........................ 5 Front components ........................ 6 Right-side components ......................7 Left-side components ......................
Page 6 Altiris Client Agent ..........................23 HP DHCP Settings Update Client ...................... 23 HP ThinState Capture ........................24 HP ThinState Deploy ......................25 Microsoft Internet Explorer ......................... 26 Windows Media Player 11 ........................26 Macromedia Flash Player ........................26 5 Keyboard Using pointing devices ........................
Page 7 Conserving battery power ....................41 Storing a battery ........................ 41 Disposing of a used battery ....................42 Using external AC power ........................43 Connecting the AC adapter ....................43 7 Multimedia Using multimedia hardware ........................ 45 Using the audio features ....................45 Using the audio-in (microphone) jack ..............
Page 8 Administrator logon ................... 62 Setting passwords in Computer Setup ................62 Using a setup password ....................62 Managing a setup password ................63 Entering a setup password ................63 Using a power-on password ....................63 Managing a power-on password ............... 64 Entering a power-on password .................
Page 9 14 Multiboot About the boot order device ....................... 87 Enabling boot devices in Computer Setup ..................88 Considering boot order changes ......................89 Choosing Multiboot preferences ......................90 Setting a new boot order in Computer Setup ..............90 Choosing a boot device using the F9 prompt ..............90 15 Computer Setup Starting Computer Setup ........................
Page 11: Notebook Tour
Notebook tour Identifying the hardware Components included with the computer may vary by region and model. The illustrations in this chapter identify the standard features on most computer models. Top components Pointing devices Component Description Left TouchPad button* Functions like the left button on an external mouse. TouchPad* Moves the pointer and selects or activates items on the screen.
Page 12: Lights
Right pointing stick button* Functions like the right button on an external mouse. TouchPad scroll zone Scrolls up or down. Right TouchPad button* Functions like the right button on an external mouse. *This table describes factory settings. To view or change pointing device preferences, select Start > Control Panel > Printers and Other Hardware >...
Page 13: Buttons And Switches
Component Description ● Volume mute light Turquoise: Computer sound is on. ● Amber: Computer sound is off. ● Battery light Amber: A battery is charging. ● Turquoise: A battery is close to full charge capacity. ● Blinking amber: A battery that is the only available power source has reached a low battery level.
Page 14: Keys
Component Description If the computer has stopped responding and Windows® shutdown procedures are ineffective, press and hold the power button for at least 5 seconds to turn off the computer. To learn more about your power settings, right-click the Power Meter icon in the notification area, and then click Adjust Power Properties Info button Launches Info Center.
Page 15: Display
Component Description Executes frequently used system functions when pressed in combination with a function key or the key. Windows logo key Displays the Windows Start menu. Windows applications key Displays a shortcut menu for items beneath the pointer. Embedded numeric keypad keys Can be used like the keys on an external numeric keypad.
Page 16: Front Components
Front components Component Description ● Wireless light Blue: An integrated wireless device, such as a wireless local area network (WLAN) device, is on. ● Off: All wireless devices are off. Power light ● On: The computer is on. ● Blinking: The computer is in Standby. ●...
Page 17: Right-Side Components
Right-side components Component Description PC Card slot* Supports optional Type I and Type II 32-bit (CardBus) or 16-bit PC Cards. SD Card Reader* Supports the Secure Digital (SD) Memory Card and MultiMediaCard (MMC) optional digital card formats. Audio-out (headphone) jack Produces sound when connected to optional powered stereo speakers, headphones, ear buds, a headset, or television audio.
Page 18: Left-Side Components
Left-side components NOTE: Refer to the illustration that most closely matches your computer. Component Description Power connector Connects an AC adapter. RJ-11 (modem) jack Connects a modem cable. Powered USB port* Provides power to an external device if used with a powered USB cable.
Page 19: Rear Components
Component Description Optical drive (select models only) Reads an optical disc. *To view the status of the USB port, use the USB Storage Options utility. Refer to the “Securing USB ports” section in this guide for additional information. Rear components Components Description RJ-45 (network) jack...
Page 20: Bottom Components
Bottom components Component Description Speaker Produces sound. Memory module compartment Contains a memory module slot and a WLAN module slot. CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region.
Page 21: Wireless Antennae
Wireless antennae Wireless antennae send and receive signals from one or more wireless devices. These antennae are not visible from the outside of the computer. NOTE: For optimal transmission, keep the areas immediately around the antennae free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental Notices that applies to your country or region.
Page 22: Identifying The Labels
Identifying the labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer: ● Service tag—Provides important information including the following: the product brand and series name, serial number (s/n), and product number (p/n) of your computer. ◦...
Page 23: Enhanced Write Filter
Enhanced Write Filter The Enhanced Write Filter (EWF) provides a secure environment for your computer by protecting it from undesired flash memory writes (the operating system and functional software components reside in flash memory). The write filter also extends the life of the computer by preventing excessive flash write activity.
Page 24: Using The Enhanced Write Filter Command Line Control
Using the Enhanced Write Filter command line control CAUTION: Terminal Administrators should use Microsoft Windows NT file security to prevent undesired usage of these commands. CAUTION: When using the -commit command, all of the temporary contents are permanently written to the flash memory. NOTE: Because the Enhanced Write Filter commands are executed on the next boot, you must restart the computer for the command to take effect.
Page 25: Using The Enhanced Write Filter User Interface
Using the Enhanced Write Filter user interface In addition to the DOS command-line tool, the Windows XPe includes an EWF user interface. You can access the EWF interface through the Windows Control Panel or through the Administrative Tools option for the administrator. To access the EWF user interface using Administrative Tools, follow these steps: Log on as an administrator.
Page 26: Using The Enhanced Write Filter Status Utility
Using the Enhanced Write Filter status utility The EWF status utility creates an icon in the notification area at the far right of the taskbar that shows the status of the EWF. You can right-click on the icon to display and execute the available options. The EWF Status icon displays the following states: ●...
Page 27: Configuration
Configuration Local drives The following sections describe the local drives on your computer. Drive Z Drive Z (HP RAMDisk) is the onboard volatile memory on the logic board of the computer. Because drive Z is volatile memory, HP recommends that you do not use this drive to store information that you want to retain.
Page 28: Saving Files
CAUTION: If the available free space on the flash drive is reduced to below 3 MB, the computer becomes unstable. A write filter is used by the computer for security and to prevent excessive flash write activity. Changes to the computer configuration are lost when the computer is restarted unless the write filter cache is disabled or a -commit command is issued during the current boot session.
Page 29: User Accounts
User accounts Creating a new user account NOTE: Be sure to disable the write filter cache during the boot session in which a new account is created. The write filter must be reenabled after saving all of your permanent changes to flash. You must log on as administrator to create user accounts locally or remotely.
Page 30 Type Administrators in the Enter the Object Names to Select box. Click Check Names, and then click OK. The newly created user is now a member of both the Administrator and User groups and should match the privileges of the default user account. Chapter 3 Configuration...
Page 31: Applications
Applications Citrix Program Neighborhood Citrix Program Neighborhood is a feature of ICA introduced with MetaFrame 1.8 that enables users to connect to MetaFrame and WinFrame servers and published applications. Program Neighborhood allows complete administrative control over application access and provides a seamless desktop integration.
Page 32: Hp Pc Session Allocation Manager (Sam) Client
HP PC Session Allocation Manager (SAM) Client The Consolidated Client Infrastructure (CCI) solution from HP centralizes computing and storage resources into easily managed, highly secure data centers, while providing end users the convenience and familiarity of a traditional environment. Additionally, companies have long used server-based computing (SBC) to create virtual instances of desktop applications on a server that multiple remote users can access.
Page 33: Altiris Client Agent
Altiris Client Agent The Altiris Client Agent allows the Altiris server to discover valid clients that are added to the network. The agent carries out assignments and reports the status of individual computers to the Altiris server. For additional information about Altiris Client Agent, go to the HP Web site at http://www.hp.com/support.
Page 34: Hp Thinstate Capture
HP ThinState Capture The HP ThinState Capture tool is a wizard-based utility that you can use to capture an HP XP Embedded image, which you can then deploy to another HP computer of identical model and hardware. NOTE: HP ThinState Capture is not a standalone utility and can only be accessed by the administrator from within the computer image.
Page 35: Hp Thinstate Deploy
HP ThinState Deploy To perform an HP ThinState deployment, follow these steps: On the computer that will receive the captured image, set the boot order in Computer Setup to USB boot. Attach the USB flash drive, and then turn on the computer. Follow the on-screen instructions.
Page 36: Microsoft Internet Explorer
Microsoft Internet Explorer Version 7.0 of the Microsoft Internet Explorer browser is installed locally on the computer. The Internet options settings for the browser have been preselected at the factory to limit writing to the flash memory. These settings should not be modified. You can access another browser through an ICA or RDP account if you need more browser resources.
Page 37: Keyboard
Keyboard Using pointing devices Setting pointing device preferences Use Mouse Properties in Windows to customize settings for pointing devices, such as button configuration, click speed, and pointer options. To access Mouse Properties, select Start > Control Panel > Printers and Other Hardware > Mouse.
Page 38: Using Hotkeys
Using hotkeys Hotkeys are combinations of the key (1) and either the key (2) or one of the function keys (3). The icons on the f3, f4, and through keys represent the hotkey functions. Hotkey functions and procedures are discussed in the following sections. Function Hotkey Display system information.
Page 39: Initiating Standby (Fn+F3)
Initiating Standby (fn+f3) Press fn+f3 to initiate Standby. When Standby is initiated, the power lights blink and the screen clears. Your computer is disconnected from the network. CAUTION: To reduce the risk of information loss, save your work before initiating Standby. The computer must be on before you can initiate Standby.
Page 40: Using The Hp Quick Launch Buttons
Using the HP Quick Launch Buttons The HP Quick Launch Buttons enable you to quickly open programs, files, or Web sites you use frequently. You can use the factory settings, which are described in the following table. Or you can reprogram the buttons by opening the Q Menu in the Quick Launch Buttons control panel.
Page 41: Accessing The Quick Launch Buttons Control Panel
Accessing the Quick Launch Buttons control panel The Q Menu in the Quick Launch Buttons control panel enables you to set your own preferences for the info button and the presentation button. Both buttons can be used to launch frequently used programs. You can open the Quick Launch Buttons control panel in any of the following ways: ●...
Page 42: Using The Keypads
Using the keypads The computer has an embedded numeric keypad and also supports an optional external numeric keypad or an optional external keyboard that includes a numeric keypad. Component Description Executes frequently used system functions when pressed in combination with a function key or the key.
Page 43: Switching Key Functions On The Embedded Numeric Keypad
Switching key functions on the embedded numeric keypad You can temporarily alternate the functions of keys on the embedded numeric keypad between their standard keyboard functions and their keypad functions by using the key or the fn+shift combination. ● To change the function of a keypad key to keypad functions while the keypad is disabled, press and hold the key while pressing the keypad key.
Page 44: Power
Power Power control and light locations The following illustration and table identify and describe the power control and light locations. Component Description ● Power button When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button to turn off the computer.
Page 45: Shutting Down The Computer
Component Description If the computer has stopped responding and Windows shutdown procedures are ineffective, press and hold the power button for at least 5 seconds to turn off the computer. To learn more about your power settings, right-click the Power Meter icon in the notification area, and then click Adjust Power Properties.
Page 46: Setting Power Options
If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided: ● Press and hold the power button for at least 5 seconds. ● Disconnect the computer from external power and remove the battery. Setting power options Using power-saving states The computer has one power-saving state enabled at the factory: Standby.
Page 47: Using The Battery Meter
Using the battery meter The battery meter is located in the notification area, at the far right of the taskbar. The battery meter allows you to quickly access power settings, view remaining battery charge, and select a different power plan: ●...
Page 48: Displaying The Remaining Battery Charge
You can keep a battery in the computer or in storage, depending on how you work. Keeping the battery in the computer whenever the computer is plugged into AC power charges the battery and also protects your work in case of a power outage. However, a battery in the computer slowly discharges when the computer is off and unplugged from external power.
Page 49 Insert the battery into the battery bay (1) until it is seated. The battery release latches (2) automatically lock the battery into place. To remove the battery: Turn the computer upside down on a flat surface, with the battery bay toward you. Slide the left battery release latch (1) until it locks into place.
Page 50: Charging A Battery
Charging a battery WARNING! Do not charge the computer battery while you are onboard aircraft. The battery charges whenever the computer is plugged into external power through an AC adapter, an optional power adapter, or an optional docking device. The battery charges whether the computer is off or in use, but it charges faster when the computer is off.
Page 51: Resolving A Low Battery Level
Resolving a low battery level CAUTION: To reduce the risk of losing information when the computer reaches a critical battery level, do not restore power until the power lights turn off. Resolving a low battery level when external power is available Connect one of the following devices: ▲...
Page 52: Disposing Of A Used Battery
Disposing of a used battery WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture a battery; short the external contacts on a battery; or dispose of a battery in fire or water. Do not expose a battery to temperatures above 60˚C (140˚F).
Page 53: Using External Ac Power
Using external AC power External AC power is supplied through one of the following devices: WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP. ●...
Page 54 Plug the other end of the power cord into an AC outlet (3). Chapter 6 Power...
Page 55: Multimedia
Multimedia Using multimedia hardware Using the audio features The following illustration and table describe the audio features of the computer. Component Description Volume mute button Mutes and restores computer sound. Internal microphone Records sound. Volume scroll zone Adjusts speaker volume. Slide your finger to the left to decrease volume and to the right to increase volume.
Page 56: Using The Audio-In (Microphone) Jack
Using the audio-in (microphone) jack The computer is equipped with a stereo (dual-channel) microphone jack that supports an optional stereo array or monaural microphone. Using sound recording software with external microphones allows for stereo recordings. When connecting a microphone to the microphone jack, use a microphone with a 3.5-mm plug. Using the audio-out (headphone) jack WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones,...
Page 57: Adjusting The Volume
Adjusting the volume You can adjust the volume using the following controls: ● Computer volume buttons: ◦ Volume mute button ◦ Volume scroll zone ● Windows volume control: Click the Volume icon in the notification area, at the far right of the taskbar. Increase or decrease the volume by moving the slider up or down.
Page 58: Using The Video Features
Using the video features Using the external monitor port The external monitor port connects an external display device, such as an external monitor or a projector, to the computer. To connect a display device, connect the device cable to the external monitor port. ▲...
Page 59: Using Multimedia Software
Using multimedia software The computer includes preinstalled multimedia software. Depending on the hardware and software included with the computer, you can play digital media, including audio and video CDs, audio and video DVDs, and Internet radio. NOTE: For information about using software included with the computer, refer to the software manufacturer's instructions, which may be provided on disc, in the software Help, or on the software manufacturer's Web site.
Page 60: Changing Dvd Region Settings
Changing DVD region settings Most DVDs that contain copyrighted files also contain region codes. The region codes help protect copyrights internationally. You can play a DVD containing a region code only if the region code on the DVD matches the region setting on your DVD drive.
Page 61: Wireless
Wireless About integrated wireless devices Wireless technology transfers data across radio waves instead of wires. Your computer may be equipped with a wireless local area network (WLAN) device. This device connects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities.
Page 62: Setting Up A Wlan
NOTE: The terms wireless router and wireless access point are often used interchangeably. ● A large-scale WLAN, such as a corporate or public WLAN, typically uses wireless access points that can accommodate a large number of computers and accessories and can separate critical network functions.
Page 63: Connecting To A Wlan
Connecting to a WLAN To connect to a WLAN, follow these steps: Verify that the WLAN device is turned on. If it is on, the wireless light is on. If the wireless light is off, press the wireless button. Open Connect to a Network by selecting Start > Network Connections. Double-click your wireless network in the list.
Page 64: Modem And Lan
Modem and LAN Using a modem The modem must be connected to an analog telephone line using a 6-pin, RJ-11 modem cable (purchased separately). In some countries, a country-specific modem cable adapter is also required. Jacks for digital PBX systems may resemble analog telephone jacks, but they are not compatible with the modem.
Page 65: Connecting A Country-Specific Modem Cable Adapter
Plug the modem cable into the RJ-11 telephone wall jack (2). Connecting a country-specific modem cable adapter Telephone jacks vary by country. To use the modem and the modem cable outside the country in which you purchased the computer, you must obtain a country-specific modem cable adapter. To connect the modem to an analog telephone line that does not have an RJ-11 telephone jack, follow these steps: Plug the modem cable into the modem jack (1) on the computer.
Page 66: Selecting A Location Setting
Selecting a location setting Viewing the current location selection To view the current location setting for the modem, follow these steps: Select Start > Control Panel. Click Date, Time, Language, and Regional Options. Click Regional and Language Options. Your location is displayed under Location. NOTE: You must commit these changes in order for them to be saved.
Page 67: Adding New Locations When Traveling
Adding new locations when traveling By default, the only location setting available to the modem is a location setting for the country in which you purchased the computer. As you travel to different countries, set the internal modem to a location setting that meets the operating standards of the country in which you are using the modem.
Page 68: Solving Travel Connection Problems
Solving travel connection problems If you experience modem connection problems when using the computer outside of the country in which you purchased it, try the following suggestions. ● Check the telephone line type. The modem requires an analog, not a digital, telephone line. A line described as a PBX line is usually a digital line.
Page 69: Connecting To A Local Area Network
Click Modem. Clear the check box for Wait for dial tone before dialing. Click OK twice. NOTE: You must commit these changes in order for them to be saved. Refer to Chapter 2, “Enhanced Write Filter,” for additional information. Connecting to a local area network Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased separately).
Page 70: 10 Security
10 Security Protecting the computer NOTE: Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen. Your computer is designed for security. All information is saved to the network and no user information can be stored on the computer.
Page 71: Using Passwords
Using passwords Most security features use passwords. Whenever you set a password, write down the password and store it in a secure location away from the computer. Note the following password considerations: ● Setup and power-on passwords are set in Computer Setup and are managed by the system BIOS. ●...
Page 72: Manual Logon
Manual logon If the automatic logon is disabled by the network administrator, log on as follows: In the Log On to Windows dialog box, type your information in the User Name and Password boxes. ● For a user, the initial user name and password are both User. ●...
Page 73: Managing A Setup Password
● It must be set and entered with the same keys. For example, a setup password set with keyboard number keys will not be recognized if you enter it thereafter with embedded numeric keypad number keys. ● It can include any combination of up to 32 letters and numbers and is not case sensitive. Managing a setup password A setup password is set, changed, and deleted in Computer Setup.
Page 74: Managing A Power-On Password
Managing a power-on password A power-on password is set, changed, and deleted in Computer Setup. To set, change, or delete this password, follow these steps: Open Computer Setup by turning on or restarting the computer, and then pressing while the “F10 = ROM Based Setup”...
Page 75: Using Microsoft Windows Firewall
Using Microsoft Windows Firewall An improved Microsoft Windows Firewall (previously known as Internet Connection Firewall, or ICF) prevents outside requests for data from entering the computer unless specifically allowed by the user. NOTE: Microsoft Windows Firewall is turned off at the factory. Configuring Microsoft Windows Firewall To provide the best security and usability, Windows Firewall provides the ability to add exceptions for applications and services so that they can receive inbound traffic.
Page 76: Gathering Configuration Information
same subnet to connect to the program on the machine but drops traffic originating from a remote network. ● Advanced tab—Enables you to configure the following functions: ◦ Network Connection Settings: Select connection-specific rules which apply per network interface. ◦ Security Logging: Create a log file for troubleshooting.
Page 77: Adding A Program
Adding a program The recommended configuration involves adding a program to the exception list. This solution provides the easiest configuration, as well as enables the firewall to open ranges of ports that can change each time the program runs. To add a program exception, follow these steps: Open Windows Firewall and click the Exceptions tab.
Page 78: Installing A Security Cable
Installing a security cable NOTE: The security cable (purchased separately) is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Loop the security cable around a secured object. Insert the key (1) into the cable lock (2). Insert the cable lock into the security cable slot on the computer (3), and then lock the cable lock with the key.
Page 79: 11 Hardware Upgrades
11 Hardware upgrades Using a USB device Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub. Devices can be connected to the computer or an optional docking device.
Page 80: Removing A Usb Device
Removing a USB device CAUTION: To prevent damage to a USB connector, do not pull on the cable to remove the USB device. To remove a USB device, safely remove the device from the USB port. Securing USB ports The USB Storage Options utility gives the network administrator control over which users can access which USB ports on a local computer.
Page 81: Using Pc Cards
Using PC Cards You can view or change the status of the PC Card slot through Computer Setup (f10). To change the status of the PC Card slot, follow these steps: Open Computer Setup by turning on or restarting the computer, and then pressing while the "F10 = ROM Based Setup"...
Page 82 Insert the card into the PC Card slot, and then push in on the card until it is firmly seated. NOTE: An inserted PC Card uses power even when idle. To conserve power, stop or remove a PC Card when it is not in use. To remove a PC Card, follow these steps: Close all programs and complete all activities that are associated with the PC Card.
Page 83: Using Sd Card Reader Cards
Using SD Card Reader cards Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital media–equipped cameras and PDAs as well as with other computers. The SD Card Reader supports the following digital card formats: ●...
Page 84: Removing A Digital Card
Removing a digital card Save your information and close all programs associated with the digital card. NOTE: To stop a data transfer, click Cancel in the operating system Copying window. To eject the digital card, press in on the digital card (1), and then remove it from the slot (2). Chapter 11 Hardware upgrades...
Page 85: Adding A Printer
Adding a printer A generic universal print driver is installed on the computer to support text-only printing to a locally connected printer. To print full text and graphics to a locally connected printer, install the driver provided by the manufacturer and follow the manufacturer’s instructions. Be sure to disable the write filter cache or run the -commit command to save the installation.
Page 86: Using Manufacturer Print Drivers
Using manufacturer print drivers Install the driver provided by the manufacturer and follow the manufacturer's instructions. Be sure to disable the write filter or issue the -commit command to save the installation. Chapter 11 Hardware upgrades...
Page 87: 12 Drives
12 Drives Identifying installed drives To view the drives installed on the computer, select Start > HP System Information. NOTE: Windows includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as running utilities or changing Windows settings.
Page 88: Using Optical Drives (Select Models Only)
Using optical drives (select models only) An optical drive, such as a DVD-ROM drive, supports optical discs (CDs and DVDs). These discs store or transport information and play music and movies. DVDs have a higher storage capacity than CDs. All optical drives can read from optical discs, as described in the following table. Optical drive type Read from CD and Write to CD-RW discs Write to DVD±RW...
Page 89: Removing An Optical Disc (Cd Or Dvd)
Gently press the disc (3) down onto the tray spindle until the disc snaps into place. Close the disc tray. NOTE: After you insert a disc, a short pause is normal before playback begins. Removing an optical disc (CD or DVD) There are 2 ways to remove a disc, depending on whether the disc tray opens normally or not.
Page 90: When The Disc Tray Does Not Open
Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. Close the disc tray and place the disc in a protective case.
Page 91 Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. Close the disc tray and place the disc in a protective case.
Page 92: Using External Drives
Using external drives Removable external drives expand your options for storing and accessing information. A USB drive can be added by connecting the drive to a USB port on the computer. USB drives include the following types: ● 1.44-megabyte diskette drive ●...
Page 93: 13 Memory Modules
13 Memory modules The computer has one memory module compartment, which is located on the bottom of the computer. The memory capacity of the computer can be upgraded by replacing the existing memory module in the memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module.
Page 94 Lift the memory module compartment cover (2) away from the computer. If you are replacing the memory module, follow these steps: Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only.
Page 95 CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. Align the notched edge (1) of the memory module with the tab in the memory module slot. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated.
Page 96 Reconnect external power and external devices. Turn on the computer. Chapter 13 Memory modules...
Page 97: 14 Multiboot
14 Multiboot About the boot order device As the computer starts, the system attempts to boot from enabled boot devices. The MultiBoot utility, which is enabled at the factory, controls the order in which the system selects a boot device. Boot devices can include optical drives, diskette drives, a network interface card (NIC), hard drives, and USB devices.
Page 98: Enabling Boot Devices In Computer Setup
Enabling boot devices in Computer Setup The computer will boot to a USB device or a NIC device only if the device has first been enabled in Computer Setup. To enable a USB device or a NIC device as a boot device, follow these steps: Open Computer Setup by turning on or restarting the computer, and then pressing while the "F10 = ROM Based Setup"...
Page 99: Considering Boot Order Changes
Considering boot order changes Before changing the boot order, note the following considerations: ● When the computer restarts after the boot order has been changed, the computer attempts to start using the new boot order. ● If there is more than one type of boot device, the computer attempts to boot using the first of each type of boot device (except for optical devices).
Page 100: Choosing Multiboot Preferences
Choosing Multiboot preferences You can use MultiBoot in the following ways: ● To set a new boot order that the computer uses each time it is turned on, by changing the boot order in Computer Setup ● To choose the boot device by pressing while the “F9 = Boot device menu”...
Page 101: 15 Computer Setup
15 Computer Setup Starting Computer Setup Computer Setup is a preinstalled ROM-based utility that can be used even when the operating system is not working or will not load. NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer.
Page 102: Using Computer Setup
Using Computer Setup Navigating and selecting in Computer Setup The information and settings in Computer Setup are accessed from the File, Security, Diagnostics, and System Configuration menus. Open Computer Setup by turning on or restarting the computer, and then pressing while the "F10 = ROM Based Setup"...
Page 103: Restoring Factory Settings In Computer Setup
Restoring factory settings in Computer Setup To return all settings in Computer Setup to the values that were set at the factory, follow these steps: Open Computer Setup by turning on or restarting the computer, and then pressing while the "F10 = ROM Based Setup"...
Page 104: Computer Setup Menus
Computer Setup menus The menu tables in this section provide an overview of Computer Setup options. NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by your computer. File menu Select To do this System information ●...
Page 105: System Configuration Menu
System Configuration menu NOTE: Some of the listed System Configuration options may not be supported by your computer. Select To do this Language (or press f2) Change the Computer Setup language. ● Boot Options Set an f9, f10, and delay when starting up. ●...
Page 106: Appendix A Routine Care
Routine care Cleaning the display CAUTION: To prevent permanent damage to the computer, never spray water, cleaning fluids, or chemicals on the display. To remove smudges and lint, frequently clean the display with a soft, damp, lint-free cloth. If the screen requires additional cleaning, use premoistened antistatic wipes or an antistatic screen cleaner.
Page 107 CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. Security devices that use x-rays to check luggage moving on conveyor belts will not damage drives. ● If you plan to use the computer during a flight, check with the airline in advance. In-flight computer use is at the discretion of the airline.
Page 108: Index
Index presentation 4, 30 setting boot order 90 AC adapter, connecting 43 Quick Launch 30 setup password 62 administrator password 61 right pointing stick 2 System Configuration airport security devices 77 right TouchPad 2 menu 95 Altiris Web site 25 TouchPad on/off 1, 4 connecting to a WLAN 53 antennae 11...
Page 109 inserting 78 left pointing stick button, playing 49 image capture 24 identifying 1 removing 79 image deployment 25 left TouchPad button, DVD drive 82 info button identifying 1 DVD region settings 50 identifying 4 legacy support, USB 95 internal display switch, lights identifying 4 battery 3, 6, 35...
Page 110 multimedia software power security, wireless 53 opening 49 connecting 43 serial number, computer 12 using 49 conserving 41 service tag 12 mute button 45, 47 control and light locations 34 setup of WLAN 52 power button setup utility identifying 3, 34 Diagnostics menu 94 network cable power connector, identifying 8...
Page 111 USB devices connecting 69 description 69 removing 70 USB hubs 69 USB legacy support 95 USB ports identifying 7 USB ports, identifying 8, 69 user password 61 utilities DHCP Settings Update Client 23 vents, identifying 7, 8, 10 video transmission types 29 volume mute button 4, 45, 47 volume mute light, identifying 3 volume scroll zone...

HP 2533t - Compaq Mobile Thin Client Administrator's Reference Manual

1 Notebook Tour

2 Enhanced Write Filter

3 Configuration

4 Applications

5 Keyboard

6 Power

7 Multimedia

8 Wireless

9 Modem and LAN

10 Security

11 Hardware Upgrades

12 Drives

13 Memory Modules

14 Multiboot

15 Computer Setup

Appendix A Routine Care

Index

Quick Links

Related Manuals for HP 2533t - Compaq Mobile Thin Client

Summary of Contents for HP 2533t - Compaq Mobile Thin Client

Table of Contents