11. TECHNICAL INFORMATION ..........18 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind.
ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- • Do not use multi-plug adapters and ex- pliance, carefully read the supplied in- tension cables. structions. The manufacturer is not re- • Make sure not to cause damage to the sponsible if an incorrect installation and mains plug and to the mains cable.
Contact the • Do not drink and play with the water in Service to replace the water inlet hose. the appliance. • Do not remove the dishes from the ap- 1.3 Use pliance until the programme is comple- ted.
ENGLISH 2. PRODUCT DESCRIPTION Worktop Detergent dispenser Upper spray arm Cutlery basket Lower spray arm Lower basket Filters Upper basket Rating plate This appliance has an internal light Salt container that comes on when you open the door and goes off when the door Water hardness dial is closed.
ENGLISH 3.1 Programme bar The programme bar shows you informa- tion that is related to the programme and to the option TimeSaver. Start and progress of the programme When the programme starts, the 2 lateral segments of the programme bar flash. As the programme is in progress, the middle seg- ments come on with fixed light, while the 2 lateral segments continue to flash.
Programme Degree of soil Programme Options Type of load phases Normal soil Wash 55 °C Crockery and cut- Rinses lery Fresh soil Wash 60 °C Crockery and cut- Rinse lery Prewash 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil.
ENGLISH Information for test institutes For all the necessary information for test performance. send an email to: info.test@dishwasher-production.com Write down the product number (PNC) that is on the rating plate. 5. OPTIONS Activate or deactivate the options The washing results are the same as with before the start of a programme.
Page 10
10 www.electrolux.com 5. Adjust the water softener to the water see the update of the programme du- hardness in your area. ration. 6. Adjust the released quantity of rinse • If the option is not applicable to the aid. programme, the related indicator does not come on.
ENGLISH 6. BEFORE FIRST USE 1. Make sure that the set level of the wa- 5. Processing residues can stay in the ter softener agrees with the water appliance. Start a programme to re- hardness in your area. If not, adjust move them.
12 www.electrolux.com • The indicator Electronic adjustment continues to flash. 1. Press the on/off button to activate the • The display shows the current set- appliance. ting of the water softener. E.g. 2. Press Reset for a few seconds. = level 5.
ENGLISH 7. DAILY USE 1. Open the water tap. 3. Load the baskets. 2. Press the on/off button to activate the 4. Add the detergent. appliance. 5. Set and start the correct programme • If the salt indicator is on, fill the salt for the type of load and the degree of container.
14 www.electrolux.com to set (from 1 to 24 hours). The Delay Cancelling the programme indicator comes on. The programme Press and hold Reset for a few seconds. indicator, programme bar and option indicators are no longer visible. Make sure that there is detergent 3.
ENGLISH tergent residues on the tableware, we • Make sure that glasses do not touch recommend that you use the tablets other glasses. with long programmes. • Put the small items in the cutlery bas- ket. Do not use more than the correct •...
16 www.electrolux.com To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C).
Page 17
ENGLISH Problem Possible solution Press Start. If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance does not fill with Make sure that the water tap is open. water. Make sure that the pressure of the water sup- ply is not too low.
18 www.electrolux.com • The indicator 6. Press the on/off button to deactivate continues the appliance and to confirm the set- to flash. ting. • The display shows the current set- 7. Adjust the released quantity of rinse ting. aid. Rinse aid dispenser off 8.