Connecting The Audio Set Transmitter - Epson MovieMate 30s Quick Manual

Connecting the Audio Set Transmitter

Before you begin, make sure that your Epson MovieMate or DVD player is turned
off. Then follow the steps in these sections on:
■
"Attaching the Antenna" below
■
"Powering the Transmitter" on page 7
■
"Connecting the Transmitter's Audio Cable" on page 9
Attaching the Antenna
1. Remove the red cap from the transmitter's antenna connector.
2. Attach one of the included antennas to the transmitter, then hand-tighten the
nut at the base of the antenna.
Caution:
Do not use a tool to tighten the nut, or you may damage the transmitter.
3. If necessary, rotate the antenna so that it is facing upwards.
When you're finished attaching the antenna, see "Powering the Transmitter" on
page 7.
6
Setting Up