Managed Servers - HP Integrity rx4610 Installation Manual

Chapter 2
Table 3. Client Workstation Preparation
Operating System
Windows NT 4.0
server or workstation,
Enterprise Edition
Windows 2000 with
Service Pack 2
Microsoft Windows
64-bit Advanced
Server on an Itanium -
based platform

Managed Servers

Table 4 lists the condition you must satisfy for managed servers.
Table 4. Managed Server Preparation
Operating System
Microsoft Windows
64-bit Advanced
Server on an Itanium -
based platform
Conditions
• Supported client console for DPC only.
• You must be connected as a user with
administrator rights.
• The ISC installation program automatically
reboots remote servers as necessary.
• Remote Access Service (RAS) must be installed
before ISC in order to connect to a managed
server through a modem.
• You must be connected as a user with
administrator rights.
• The ISC installation program automatically
reboots remote servers as necessary.
• Remote Access Service (RAS) must be installed
before ISC in order to connect to a managed
server through a modem.
• Supported client console for DPC only.
• You must be connected as a user with
administrator rights.
• The ISC installation program automatically
reboots remote servers as necessary.
• Remote Access Service (RAS) must be installed
before ISC in order to connect to a managed
server through a modem.
Condition
• You must enable the event-logging feature of the
BIOS for system management status and
information. To enable the event-logging feature,
follow these steps:
a. Power on the server and, when prompted, press
the <F2> key to enter the BIOS setup.
b. Use the arrow keys to highlight the
Advanced menu.
Installing and Upgrading ISC
5