Audio Preset Memory; Audio Preset Recall; Firmware Version Display - Kenwood KDC-X8006U Instruction Manual

Menu system
Other than Standby mode

Audio Preset Memory

Registering the value setup by Sound Control. The
memory cannot be erased by the Reset button.
1
Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 7)
- <Audio Setup> (page 8)
2
Enter Menu mode
Using the Control knob, select "MENU".
For the operation method, refer to <Function
Control mode> (page 10).
"MENU" is displayed.
3
Select Audio Preset mode
Turn the Control knob.
Select the "Audio Preset" display.
4
Enter Audio Preset mode
Press the Control knob for at least 1 second.
5
Select the Audio Preset Memory
Turn the Control knob.
Select the "Memory" display.
6
Determine whether to put the Audio Preset in
the memory
Press the Control knob.
"Memory?" is displayed.
7
Put the Audio Preset in the memory
Select "YES" using the Control knob.
"Memory Completed" is displayed.
8
Exit Audio Preset mode
Press the [FNC] button.
⁄
• Register 1 pair of Audio Preset Memory. You cannot
register by the source.
• When you press the Reset, all the sources will be the
setting value which is registered.
• The following items cannot be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume
|
30
English
Other than Standby mode

Audio Preset Recall

Recalling the sound setup registered by <Audio
Preset Memory> (page 30).
1
Select the source
Press the [SRC] button.
Refer to <Selecting the Source> (page 6).
2
Enter Menu mode
Using the Control knob, select "MENU".
For the operation method, refer to <Function
Control mode> (page 10).
"MENU" is displayed.
3
Select Audio Preset mode
Turn the Control knob.
Select the "Audio Preset" display.
4
Enter Audio Preset mode
Press the Control knob for at least 1 second.
5
Select the Audio Preset Recall
Turn the Control knob.
Select the "Recall" display.
6
Determine whether to recall the Audio Preset
Press the Control knob.
"Recall?" is displayed.
7
Recall the Audio Preset
Select "YES" using the Control knob.
"Recall Completed" is displayed.
8
Exit Audio Preset mode
Press the [FNC] button.
⁄
• The User memory of "SYSTEM Q" in <Audio Control>
(page 7) is changed to the value which was recalled.
• The source tone memory item of <Audio Control> (page
7) is changed to the value which was recalled by the
selected source.
In Standby mode

Firmware version display

Displaying the firmware version with the unit.
Turn the Control knob.
Select the "F/W Version : " display.