Installing And Recharging The Battery; Installing - Philips TSI6400 Manual

Installing and Recharging the Battery

Installing

After installing the Wireless LAN Adapter, you install the battery. The battery is precharged, but it is advisable to
charge the battery for three hours when you start using the iPronto. See Recharging on page 13.
Insert the battery as follows:
iPronto User Guide
10
1 Lift the stand (figure 1).
2 Open the battery cover by pushing the grips and sliding off the cover in the direction indicated below
(figure 2).
Figure 1 Figure 2