Remote Channels; Remote Target Name - Yamaha DM1000 Version 2 Manual

❏ Remote Channels
When you select the REMOTE 1 or REMOTE 2 LAYER button in the Master win-
dow, Remote Channels are displayed.
A
Channel number
This is the channel number. Double-click the channel number to open the
Selected Channel window.
B
[SELECT] button
This button is used to select the Remote Channel.
C
[ON] button
This button turns the Remote Channel on and off. It appears orange while the
channel is on.
Note:
can use the [ON] buttons and channel faders to control the functions specified on
the Remote page.
D

Remote target name

A This name indicates the remote target assigned on the DM1000.
E
Channel fader
This is the Bus Out's fader.
Note:
can use the [ON] buttons and channel faders to control the functions specified on
the Remote page.
F
Fader value indicator
This indicator indicates the fader position in the range of 0 through 127.
B
If the remote target is set to User Assignable Layer:
In this case, the assigned channels are displayed. For more information, refer to
C
"Input Channels" on
D
Fader is assigned, only the [AUTO], [SOLO], and [ON] buttons and channel faders
are displayed.
E
F
When the remote target setting on the DM1000 is set to User Defined, you
When the remote target setting on the DM1000 is set to User Defined, you
page 8 and "Output Channels" on page 10. If the Group Master
DM1000 Editor—Owner's Manual
11