Installing The Dvc Storage Driver - Canon 7920A001 - GL 2 Camcorder Instruction Manual

Installing the DVC Storage Driver

This driver is designed for use with Mac OS8.6. For Mac OS 9 or higher, you
should use the standard USB driver software that comes with the OS, without
installing this driver.
1.
Connect the Power Adapter to the camcorder.
2.
Connect the camcorder to the computer using the supplied
USB cable (
3.
Slide the POWER switch to PLAY(VCR) and the TAPE/CARD
switch to CARD.
4.
Double-click the CD-ROM drive icon, followed by the [Mac
OS 8/9] folder.
5.
In [DVC Storage Driver], open the folder with the name that
matches the name of your camcorder.
6.
Use drag and drop to move the two files inside the folder
into the [Extensions] folder, which is located inside the
[System Folder] folder on your hard disk.
• The names of these files are [DV×-USB Storage Driver] and [DV×-USB
Storage Shim] (× stands for either 'G' or 'H').
7.
Restart your computer.
• The [CANON_DV] icon or the corresponding drive icon will be displayed
on your desktop.
56
57).