D-Link UAP CLI Command Reference
Using the add Command
The
command enables you to add a new instance or group of instances of a class and has the following
add
syntax:
add unique-named-class instance [property value ... ]
add group-named-class instance [property value ... ]
add anonymous-class [property value ... ]
For example:
add mac-acl default mac 00:01:02:03:04:05
Note: To add an instance to a uniquely named class, you must assign the instance a name that is not
already in use by another instance of that class. If you add instances to group-named classes, you can
form groups by creating instances and assigning them identical names. All instances of a group-named
class that have the same name form a group of instances.
Using the remove Command
The
command enables you to remove an existing instance of a class. It has the following syntax:
remove
remove unnamed-class [property value . . . ]
remove named-class instance | all [property value . . .]
For example:
remove mac-acl default mac 00:01:02:03:04:05
Additional CLI Commands
The CLI also includes the following commands for maintenance tasks:
Command
save-running
reboot
factory-reset
firmware-upgrade
config
D-Link
November 7, 2011
Table 2: Additional CLI Commands
Description
The
command saves the running configuration as the startup
save-running
configuration.
For more information, see
The
command restarts the access point (a "soft" reboot).
reboot
The
command resets the AP to factory defaults and reboots.
factory-reset
Use the
firmware-upgrade
Use the
command to upload or download the AP configuration file.
config
"Saving Configuration Changes" on page
command to upload a new AP image.
Unified Wired and Wireless Access System
Using the add Command
21.
Page 16