D-Link DWL-6600AP Specifications page 3

Technical Specifications
System
Wi-Fi Interface
LAN Interface
Console
Antenna
Power Method
Wireless Frequency
Data Transfer Rate
Operation Channel (2.4 GHz)
System Management
Security
SSID
Wireless Security
Detection & Prevention
Authentication
Physical & Environmental
Power Adapter
Power over Ethernet
Stand-Alone Mode
Managed Mode
(Managed by D-Link Wireless Switch/
Wireless Controller)
Dimensions
Weight
Operating Temperature
DWL-6600AP
• 802.11a/b/g/n 2.4/5.0 GHz
• 10/100/1000 Gigabit Ethernet
• RJ-45
• 2x2 MIMO embedded antenna with 4 external antenna connectors
• IEEE 802.3af Power Over Ethernet or external power adapter
• 802.11n: 2.4 to 2.497 GHz and 4.9 to 5.85 GHz
• 802.11b/g: 2.4 to 2.4835 GHz
• 802.11n: 6.5 Mbps-130 Mbps (20 MHz)
6.5 MHz-300 Mbps (40 Mbps)
• 5.0 GHz: 12 Non-Overlapping Channels for US and Canada
• HTTP/HTTPS Web-based User Interface
• 16 SSID per frequency band, 32 SSID per AP
• WEP • Dynamic WEP
• Rogue and Valid AP Classification
• MAC Address Filtering
• 12 V 1 A
• 48 VDC +/- 10%
• WEP/WPA/WPA2 Security
• Rogue AP Detection
• Station Isolation
• MAC Address Filtering
• AP Load Balancing Setup
• Centralized Management
• Centralized Firmware Dispatch
• Visualized AP Management Tool
• Auto-Power Adjustment
• Dynamic Auto-Channel Selection
• L2 Fast Roaming
• L3 Fast Roaming
• Captive Portal
• WEP/WPA/WPA2 Security
• 6.14"x 3.05" (156 x 77.5 mm)
• 1.1 lbs (0.5kg)
• 32°F to 104°F (0° to 40°C)
Unified N Concurrent Dual-band PoE Access Point
• 802.11a: 5.15 to 5.35 GHz and 5.725 to 5.825 GHz
• 802.11a/g: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps
• 802.11b:
• 2.4 GHz: 11 channels for United States
• SNMP, SSH, Telnet Command Line
• Station Isolation
• WPA Personal/ Enterprise
• 802.1x
• WDS
• AP Clustering
• QoS/WMM
• Local Storage Configuration
• Rogue AP Detection
• Rogue AP Mitigation
• WIDS
• Station Isolation
• MAC Address Filtering
• AP Load Balancing Setup
• WDS
• QoS/WMM
11, 5.5, 2 and 1 Mbps
• WPA2 Personal/ Enterprise