Advertisement
Quick Links
Electric andGasDrye
DLE2512W/DL
G2522W
DLE2514W/D LG2524W
Thank you for buying a LG dryer.
Please read your owner's manual carefully, as it provides
instructions on safe installation, use and maintenance.
Retain it for future reference and record the model and serial
number of your dryer.
P/No.: 3828EL3004B
Advertisement
Related Manuals for LG D2524W
Summary of Contents for LG D2524W
- Page 1 Electric andGasDrye DLE2512W/DL G2522W DLE2514W/D LG2524W Thank you for buying a LG dryer. Please read your owner's manual carefully, as it provides instructions on safe installation, use and maintenance. Retain it for future reference and record the model and serial number of your dryer.
- Page 2 FOR ELECTRIC DRYER ............... 15-18 PART6. ELECTRICAL REQUIREMENTS FOR GAS DRYERS ................PART7. GAS REQUIREMENTS AND INSTRUCTIONS ..................PART8. EXHAUST REQUIREMENTS AND MAINTENANCE ................21-22 PART9. OPERATING YOUR DRYER ....................... 23-28 PART10. TROUBLESHOOTING GUIDE ......................29-31 LG DRYER LIMITED WARRANTY ........................
- Page 3 • Name : Electric and Gas Dryer • Power supply : Please refer to the rating label regarding detailed information. • Size : 68.6 X 96.5 X 73.0 (cm) : IEC 7.0 cu.ft. • Dryer capacity • Weight : 126(Ibs) Specifications are subject to change...
- Page 4 LG will repair or replace any of its mechanical or electrical parts if they are defective in material or workmanship. WARNINGS...
-
Page 5: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING! help reduce any risk of electric shock, fire, or other personal or property injury 1) Read all instructions before using the appliance. 8) Do not repair or replace any part of the appliance or attempt any servicing unless specifically 2) Do not dry articles that have come into contact with recommended in the user-maintenance... -
Page 6: What To Do If You Smell Gas
WHAT TO DO IF YOU SMELL GAS: • Do not try to light a match or cigarette, or turn WARNING! on any gas or electrical appliance. • Do not touch any electrical switches. Do not • Keep flammable materials and vapors, such use any phone in your building. - Page 7 The following instructions will help guide you through the initial steps of setting up your dryer for use. Please note that every section of this manual provides important information regarding the preparation and use of your dryer, and it is important that you review this entire manual before proceeding with any installation or use.
- Page 8 Once in position, adjust the leveling legs of the dryer until it is level from left to right and from front to back. The leveling legs must remain firmly on the floor and the dryer should not rock. The maximum slope of the dryer from left to right or from front to back should not exceed 2.5 cm (1 inch).
-
Page 9: Warranty
• ALTERNATE EXHAUST DIRECTIONS ] • Remove a screw and exhaust duct. In addition to the following warnings, please refer to manual section on Exhaust Requirements Maintenance. IMPORTANT." To reduce the risk of fire, combustion, and gas accumulation, the dryer must be vented to the outdoors. - Page 10 (Gas dryer only). In addition to the following, please refer to manual section on Gas Requirements Following are several warnings and instructions and Instructions. concerning making the electrical connection electric dryers. More detailed information concerning the electrical connection is provided the manual section entitled Electrical Requirements...
- Page 11 Prior to the first use of this appliance, use all- Effective dryer operation requires appropriate dryer purpose cleaning products or a solution of detergent airflow. The adequacy of the airflow can be measured by evaluating the static pressure. Static and water, with damp clothes to remove from the inside of the dryer drum/drying compartment pressure in the exhaust...
- Page 12 4) Electric dryers may be vented to the outside using the back, left, right, or bottom panel. 5) Gas dryers may be vented to the outside using the back, left, or bottom panel. Gas dryer may not be vented to the outside using the right side panel because of the burner housing.
- Page 13 To ensure safe and secure installation, please Secure stacking kit side bracket to the observe the instructions below. washer with a screw on the back of bracket. Repeat Steps 2, 3, 4 for the other side. Do not attempt installation with one person.
- Page 14 Attach the double-faced tape of the bracket to the Remove pedestal, installation hardware, and dryer as shown so the bent parts of the brackets instructions from the shipping carton. align with the edge and can be attached to the pedestal with screws. Position dryer on top of the pedestal.
- Page 15 Following are additional instructions regarding electrical connections and requirements for electric dryers. Warning: A_, Important To help prevent fire, electric shock, serious injury or death, the wiring and grounding must conform to the latest edition of the National Electrical Code, ANSI/NFPA 70 and all applicable local regulations.
- Page 16 Review the following options to determine the appropriate electrical connection for your home: Important : use 4-wire connection in the places such as mobile homes and areas where 3-wire connections is not available. Use the instructions at this section if your home has a 4-wire receptacle (NEMA type 14-30R) and you...
- Page 17 Important : use 3-wire connection in the places such as mobile homes and areas where 3-wire • If your local codes or ordinances do not allow the connections is not available. use of a 3 wire connection, or you are installing your dryer in a mobile home, you must use a 4- Prepare minimum 5ft(1.52m)
- Page 18 • If your local codes or ordinances do not allow the If your local codes or ordinances permit the connection of a frame-grounding conductor to the connection of a frame-grounding conductor to the neutral wire, use the instructions under this neutral wire, use these instructions.
- Page 19 120 Volt, 60 Hertz, with 3-Prong Grounding Plug Following are additional instructions regarding electrical connections and requirements for gas dryers. Important Warning: To help prevent fire, electric shock, serious injury or death, the wiring and grounding must conform to the latest edition of the National Electrical Code, ANSI/NFPA 70, or the Canadian...
- Page 20 Following are important instructions and information concerning the requirements for the gas supply and service for gas dryers. Important Warning: The gas supply and service for a gas dryer must comply with all local codes and ordinances. In the absence of any local codes or ordinances in your area, the gas supply and service for your gas dryer must comply with the latest edition of the National Fuel Gas Code, ANSI Z223.1/NFPA If using a rigid pipe, the rigid pipe should be 1/2...
- Page 21 Following are important instructions and information concerning the exhaust requirements for your dryer. Important Warning: To reduce the risk of fire, combustion, or accumulation of combustible gases, DO NOT exhaust dryer air into an enclosed and unventilated area, such as an attic, wall, ceiling, crawl space, chimney, vent, or concealed space of a building.
- Page 22 Exhaust and Dryer Maintenance Cleaning the Lint Screen 1. Clean the lint filter either before drying each load or after drying each load. Always make sure the lint filter is clean before starting a new load, Disconnect the dryer,s electric power because a clogged...
- Page 23 Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual more detailed information. Important Warning: To reduce the risk of fire, electric shock, or injury to person, read this entire manual, including the Important Safety Instructions, before operating...
- Page 24 To stop your dryer at any time • Select an Sensor Dry Cycle. MORE Press START/PAUSE or open the door. Select DRY LEVEL to adjust how dry you want the load. As NORMAL the cycle runs, the control senses the dryness of the load and adjusts the time To pause the dryer at any time...
-
Page 25: Dry Level
Sensor Dry Preset Cycle Settings Sensor Temp: Time* Cycles Load Type (Minutes) COTTON/TOWELS Medium Towel, denim pants High NORMAL Medium This feature allows you to lock your settings to Work clothes,corduroys prevent children from changing them. You can also use the child lock feature DELICATES to prevent unintended cycle or option changes... - Page 26 Manual Preset Cycle Settings Manual Dry Default Time* Cycles Load Type lempl (Minutes) Use Modifiers to select temperatures for the Manual Cycles. Press TEMP. CONTROL until the desired SPEED temperature setting glows. Temperature modifiers SMALL LOADS High cannot be used with the Sensor Dry Cycles. AIR DRY Air DrY HIGH...
- Page 27 NOTE: Check the lint screen and remove any lint accumulated from items dried on the rack. Thedryerrackis shipped in place in yourdryer. Suggested Items Remove anddiscard anypacking material b efore for Rack Drying Setting Time* use. (Minutes) The RACK DRY is designed for use with items that Washable wool items you do not want to tumble dry, including...
- Page 28 Clean the lint filter after each use and check it before use. Not cleaning or emptying the filter wi!! increase d_ing time and energy c°nsumpti°n, theref°re d_er !ife expectancy could be sh°rtened afte r a!L Clean the door and its opening 1.Open the door and pull the filter 1.
- Page 29 Troubleshooting Tips Save time and money! Review the charts on the following pages first and you may not need to call for service. 1.Problem:My Dryer Won't Start • Is the dryer ..plugged lug. Confirm that th e dryer s plug is securely and completely pushed into the laundry •...
- Page 30 4.Problem:There is Linton my Clothes • Is your lint filter full? Please refer to the mtmual section on cletming the lint filter, and please confirm that the lint filter is clean. It is importtmt that the lint filter is clean before each new load of laundry.
- Page 31 7.Problem:It takes too long for my clothesto dry • Are you drying large loads of heavy Heavy I_brics take longer to dry because they tend to retain more moisture. To help fabrics? reduce and maintain more consistent drying times for large and heavy fabrics, separate these items into smaller loads of a consistent size.
- Page 32 LG Electronics Inc. will repair or at its option replace, without charge, your product if it proves to be defective material or workmanship under normal use during the warranty period set forth below, effective from the date of original consumer purchase of the product.