Whirlpool AFB 647 A Instructions For Use Manual page 11

60202048GB.fm Page 12 Friday, April 29, 2011 3:24 PM
• This must be done before fitting the cabinet outer
door.
• Ensure that the fridge is unplugged and empty.
• We recommend you to have someone to assist
you.
Tools required
• Phillips style screwdriver.
• Flat bladed screwdriver.
Remove the blanking plates from the outside of the Larder fridge
door.
With the door closed remove the screws on the outside of the
hinges. Start with the top hinge.
Open the hinges away from the door.
Supporting the bottom of the door as you do so.
Be careful with the hinges. Remove the door.
With the top hinge open undo the screws holding it to the cabinet.
Be careful with the hinge, use a long shafted screwdriver if you
have one.
WARNING! Take care when opening the hinges.
They are sprung and there is a risk of injury if they
close on your hand
.
12
Front spacer
(back spacer
is not within
the picture)