Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Internet Connection Type and Static IP Settings
Parameter
Internet Connection Type
Static IP
Netmask
Gateway
LAN MTU
Ethernet MTU (Cisco
SPA525G//525G2 SPCP
only)
Duplex Mode
Description
Choose the type of internet connection:
•
DHCP
•
Static IP
•
PPPoE (not applicable to WIP310)
If static IP was chosen as the type of internet
connection, displays the static IP address assigned to
the phone.
If static IP was chosen as the type
Default router IP address. Blank if DHCP assigned.
LAN Maximum Transmission Unit size. Default value:
1500.
Ethernet Maximum Transmission Unit size. Default
value: 1500.
Duplex Mode—Choose one of the following to
configure the speed/duplex for the phone's Ethernet
ports:
•
Auto
•
10MBps/Duplex
•
10MBps/Half
•
100Mbps/Duplex
•
100MBps/Half
B
240