Canon Usb Video Driver; Capturing/Recording Movies; Capturing Movies From The Tape To The Computer - Canon 9540A003 - Optura 400 Camcorder Instruction Manual

Canon USB Video Driver

Capturing/Recording Movies

If your camcorder is listed under category A in Camcorder Categories (
you can perform the followings by connecting the camcorder to a computer with
Hi-Speed USB 2.0 using a USB cable.
Set the camcorder to PLAY (VCR) mode.

- Capturing movies from the tape to the computer.

- Recording movies that have been edited on a computer to the tape.
- Converting analog signals from a connected VCR or 8mm camcorder to digital
signals and transferring them to the computer. For details, refer to the
camcorder instruction manual.
Above three operations can be performed with Windows Movie Maker 2 (version
2.1.4026.0).
Make sure to connect the camcorder to a computer with Hi-Speed USB 2.0.
Capturing movies from tape to the computer and recording edited movies to
the tape using the Canon USB Video Driver will not work when connecting to
a computer with USB 1.1 port.
Do not change the position of the POWER switch or TAPE/CARD switch
while capturing movies to the computer or recording movies to the tape.
Proper operation is not guaranteed on all editing softwares (including
Windows Movie Maker 2).
Capturing movies from the tape to the computer
1
Set the camcorder to PLAY (VCR) mode.
2
Load a recorded cassette.
Make sure that "AV
3
Connect the camcorder to the computer using the USB
cable ( 23).
Start DV Messenger and capture movies to the computer. For details, refer to
the Windows Movie Maker 2 Help menu.
DV" is not displayed.
Capturing/Recording Movies
E
13),
69