Thank you for buying the Sensixx B22L steam • The appliance must never be placed directly under the station, the new steam-ironing system from Bosch. tap to fill the water tank. Carefully read through the operating instructions for • The appliance must be used and placed on a stable the appliance and safeguard them for future refer- - surface.
Preparations Setting the temperature 1. Release the iron from its lock system (13) by pulling 1. Check the ironing instruction label on the garment to the lever located at the heel of the iron backwards. determine the correct ironing temperature. 2. Remove any label or protective covering from the 2.
“Pulse steam” function Energy saving button This appliance has a special function for tackling difficult (model dependent) creases. If the “Energy saving” button (8) is switched on, you The “Pulse steam” function helps soften stubborn can save up to 25% of the energy and 40% of the water garments like jeans or linen faster.
Automatic clean warning f) If the steam station has steam regulator (10*), set it to the maximum position Pilot light (11) will flash indicating that boiler must be g) Hold the iron over the sink or a container to collect the rinsed. water.
Advice on disposal Tips to help you save energy Our goods come in optimised packaging. This basically Steam production consumes the most energy. To help consists in using non-contaminating materials which minimise the energy used, follow the advice below: should be handed over to the local waste disposal service •...
Page 9
Just press the trigger once again and the iron steaming after placing activated by double click. will stop steaming at once. it on the pad (2). If the above does not solve the problem, get in touch with an authorised technical service. You can download this manual from the local homepages of Bosch.