HP A1210n - Pavilion - 512 MB RAM Getting Started Manual page 33

3 Connect the rear speaker cable to the black connector that matches the back of
your PC.
6
3
For type 3 connectors, the blue Audio Line In connector functions as a rear line
out when a multichannel audio configuration is activated.
4 Connect the cables to the audio system.
5 Connect the front and rear speakers to the subwoofer. Refer to the speaker
documentation.
6 Turn on the PC.
NOTE: Always turn on the PC before you turn on the speaker system.
7 Plug in the speaker system power.
8 Turn on the speaker system.
9 After the speakers are connected to the PC, configure the audio software for
sound output for your PC model:
• Type 3 connectors: See "Configuring Audio Output with Multi-channel
Sound Manager" on page 37.
• Type 6 connectors: See "Configuring Audio Output with Sound Effect
Manager" on page 38.
The following diagram shows a typical 4.1 audio installation:
S
Configuring Speaker and Sound Options
27