Advertisement
4. To use a manual dry cycle
• Select a Manual Dry Cycle.
• Press MORE TIME or LESS TIME until the
desired drying time is displayed.
Tap MORE TIME
or LESS TIME and the time will change by 1
minute interval.
The MORE TIME or LESS TIME feature canbe used
with Manual Dry, Time Dry and Rack Dry Cycles.
• Press TEMR CONTROL
until the desired
temperature
indicator glows.
• (OPTIONAL
STEP) If desired, select OPTIONS.
For more details, see Options.
• Press START/PAUSE.
Be sure the door is closed.
• If you do not press START/PAUSE
within 10
minutes
of selecting
the cycle, the dryer
automatically
shuts off.
• If you wish to end your drying cycle after pressing
START/PAUSE,
press START/PAUSE
again.
To stop your dryer
at any time
Press START/PAUSE
or open the door.
5. Pausing or restarting To pause the dryer
at
any time
Open the door or press START/PAUSE
once.
To restart
the dryer
Close the door. Press START/PAUSE.
Drying will continue from where the cycle
was interrupted if you close the door and press
STARTwithin 10 minutes. If the cycle is
interrupted for more than 10 minutes, the dryer
will shut off. Select new cycle settings before
restarting the dryer.
_l_ WARNING!
rnproper wire connection or related winng error
will can cause fire or electric shock or death.
1.0pen
the door
and pull the filter
straight
up
28
2.Clean the filter using one of the following methods.
!1 Clean the door and its opening
1. Wipe out the door
opening.
Otherwise,
build-ups
of dirty and
foreign
objects
will
damage
sealing
of
door.
2. Clean the transparent
glass door to keep
inside view clear
through
the glass.
(_ Run the fingers
across the filter
Vacuum the lint filter
Wash the lint
screen
in warm,
soapy water.
Dry thoroughly
and
replace.
Advertisement
