Lenovo 20074CU User Manual page 40

If you select this mode, Access Connections will not handle the configuration of
wireless LAN. Select this mode to configure adapters that cannot be directly
configured by use of Access Connections. When you use this mode, make note
that:
v Depending on the wireless LAN adapter installed on your computer, reconnecting
v If you have other location profiles configured by use of Access Connections,
v If the location profile configured by use of Access Connections is no longer
To configure 802.1x by use of Windows standard functions, select Use Windows to
Configure Wireless Network as the wireless security type. The 802.1x Settings
windows opens; click Authentication Properties.
Figure 31. 802.1x Settings window
The Windows Authentication Properties window is displayed.
Configure the settings as follows:
v Association tab
v Authentication tab
30
ThinkVantage Access Connections 4.1: User's Guide
to the access point or 802.1x authentication when your computer returns from
suspend mode may take longer.
switching to a location profile configured by use of Windows standard features
may take time.
valid—for example, if you have moved to a different location—you can switch to
a different location profile. For a Windows-configured location profile, however,
you will need to logon to Windows again. Automatic location switching that
involves domain logon is not supported.
SSID The SSID entered here must match the one entered previously, in step
17 on page 16.
Data encryption
If data encryption is necessary, select Key is provided, and make sure
that no other options are selected.
Enable 802.1x on this network
Select this check box.