Brother DCP-8110DN Network User's Manual page 156

Multi-protocol on-board ethernet multi-function print server and wireless ethernet multi-protocol print server
Hide thumbs Also See for DCP-8110DN:
Table of Contents

Advertisement

Troubleshooting
I'm using security software. (continued)
Question
I want to know the
necessary port number for
the security software
settings.
I want to check my network devices are working properly.
Question
Is your Brother machine,
access point/router or
network hub turned on?
Where can I find my Brother
machine's network settings,
such as IP address?
How can I check the link
status of my Brother
machine?
Can you "ping" the Brother
machine from your
computer?
Interface Solution
wired/
The following port numbers are used for Brother network features:
wireless
Network scanning i Port number 54925 / Protocol UDP
PC-FAX RX
Network scanning/printing
number 161 and 137/ Protocol UDP
BRAdmin Light
1
®
Windows
only.
For details on how to open the port, see the instructions of the security
software or ask the manufacturer.
Interface Solution
wired/
Make sure you have confirmed all instructions in First check the following:
wireless
uu page 144.
wired/
Print the Network Configuration Report. See Printing the Network
wireless
Configuration Report uu page 63.
wired/
Print the Network Configuration Report and check that Ethernet Link
wireless
Status or Wireless Link Status is Link OK. See Printing the Network
Configuration Report uu page 63.
If the Link Status shows Link DOWN or Failed To Associate, start over
again from the First check the following: uu page 144.
wired/
Ping the Brother machine from your computer using the IP address or the
wireless
node name.
Successful i Your Brother machine is working correctly and connected
to the same network as your computer.
Unsuccessful i Your Brother machine is not connected to the same
network as your computer.
®
(Windows
)
Ask the network administrator and use the Network Connection Repair
Tool to fix the IP address and the subnet mask automatically. For the
detail of the Network Connection Repair Tool, see (Windows
the IP address and the Subnet Mask using the Network Connection
Repair Tool. in Is your Brother machine assigned with an available IP
address? uu page 146.
(Macintosh)
Confirm the IP address and the Subnet Mask are set correctly. See
Confirm the IP address and the Subnet Mask in Is your Brother machine
assigned with an available IP address? uu page 146.
1
i Port number 54926 / Protocol UDP
1
, PC-FAX RX
1
i Port number 161 / Protocol UDP
1
1
, Remote Setup
i Port
®
) Confirm
9
149

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents