internal components or to add or replace a
hard drive.
Note:
Make sure the computer is turned off and the
modem/phone cable and power cord are
disconnected from the computer.
1 Remove the side panel (see "Removing the
Side Panel" on page 3).
2 Gently lay the computer on its side.
3 Remove the fan duct (see "Removing the
Fan Duct" on page 5).
4 Remove the power and IDE cables from the
back of the diskette and hard drives. Make
note of each connection before
disconnecting the cables.
5 Push down on the drive cage release tab
(D).