EpsonNet Config's setting screens
TCP/IP, SNMP (IP trap)
The following table lists the network components required for network
printing.
Printing method
LPR printing
4. If the necessary components are not in the list, click Install to install them.
5. Double-click Internet Protocol Version 4 (TCP/IPv4) on the Local Area
Connection Properties dialog box to open the Internet Protocols Version 4
(TCP/IPv4) Properties dialog box. Set the IP address, the subnet mask,
etc., and then click OK.
6. Restart the computer.
The necessary components are now installed. Go to the section "Connecting
the Network Printer to the Network" on page 16.
Windows XP
For Windows XP, use the following procedure to install the necessary
components.
Note:
The Windows XP CD may be required during the installation.
1. Click Start, select Control Panel, and then select Network Connections.
2. Under LAN or High-Speed Internet, right-click the Local Area
Connection icon and choose Properties.
Necessary components
Internet Protocol (TCP/IP)
Necessary components
Internet Protocol (TCP/IP)
Setting Up Your System for Network Printing
13