Toshiba PLL3AC-02P014 User Manual page 26

Power
Battery
HDD
Bridge media slot
Wireless
communication
Wireless WAN
communication
Arrow Lock
Numeric Lock
User's Manual
The Power indicator normally glows green when
the computer is turned on. However, if you turn
the computer off into Standby Mode, this
indicator will flash amber - approximately two
seconds on, one second off - both while the
system is shutting down and while it remains in
Standby Mode.
The Battery indicator shows the condition of the
battery's charge - green indicates the battery is
fully charged, amber indicates the battery is
charging, and flashing amber indicates a low
battery condition. Please refer to Chapter 6,
Power and Power-up Modes
information on this feature.
The HDD indicator glows green whenever the
computer is accessing the built-in hard disk
drive.
The Bridge media slot indicator glows green
when the computer is accessing the Bridge
media slot.
The Wireless communication indicator glows
amber when the Bluetooth and Wireless LAN
functions are turned on. Only some models are
equipped with Bluetooth and Wireless LAN
functions.
The Wireless WAN communication indicator
glows or blinks blue when the Wireless WAN
function is on. The indicator will glow or blink in
order to indicate the connection status of the
Wireless WAN function. A Wireless WAN module
must be installed to use this function. Some
models are equipped with a Wireless WAN
module.
When the Arrow indicator lights green, you can
use the dark gray labeled keys on the keypad
overlay as cursor keys.
This indicator glows green, you can use the
keypad overlay (dark gray labeled keys) for
numeric input.
The Grand Tour
for more
2-2